ABS 上海高桥 8391 注塑级 高流动
¥10800.00
ABS 德国巴斯夫 HH-106 注塑级 耐高温 填充级
¥14950.00
ABS TH-9S 日本电气化学 注塑级 透明级 通用级
¥11800.00
PBT 420SEO 沙伯基础（原GE）注塑级 阻燃级 通用级
¥30500.00
PBT 3316 日本宝理 注塑级 阻燃级
¥31650.00
PPO 日本旭化成 540Z 注塑级 阻燃级 通用级
¥27700.00
| | | | ||||
特性(Properties) | 測試方法(Test Method) | 測試條件(Test Condition) | | 單位(Unit) | D-120 | ||
| | | | | | | |
引張強度 | ASTM D638 | | 1/8”,6 mm/min | | Kg/cm2(lb/in2) | 420(6000) | |
Tensile Strength | | | |||||
| | | | | | | |
| | | | | | | |
延伸率 | ASTM D638 | | 1/8”,6 mm/min | | % | 40 | |
Tensile Elongation | | | |||||
| | | | | | | |
| | | | | | | |
彎曲強度 | ASTM D790 | | 1/4”,2.8 mm/min | | Kg/cm2(lb/in2) | 670(9500) | |
Flexural Strength | | | |||||
| | | | | | | |
| | | | | | | |
彎曲彈性率 | ASTM D790 | | 1/4”,2.8 mm/min | | Kg/cm2(lb/in2) | 21000(299000) | |
Flexural Modulus | | | |||||
| | | | | | | |
| | | | | | | |
IZOD 衝擊強度 | ASTM D256(Notched) | | | 1/4”,23℃ | | Kg-cm/cm(ft-lb/in) | 35(6.4) |
Izod Impact Strength | | | 1/8”,23℃ | | Kg-cm/cm(ft-lb/in) | 40(7.3) | |
| | | | ||||
| | | | | | | |
流動係數 | ASTM D1238 | | | 200℃,5Kg | | g/10min | 0.7 |
Melt Flow Index | | | | ||||
| | | | | | | |
| | | | | | | |
硬度 | ASTM D785 | | | 1/2” | | R Scale | 105 |
Hardness | | | | ||||
| | | | | | | |
| | | | | | | |
比重 | ASTM D792 | | | 23℃ | | - | 1.04 |
Specific Gravity | | | | ||||
| | | | | | | |
| | | | | | | |
軟化點 | ASTM D1525 | | 1/8”,50℃/hr | | ℃ (℃) | 103(217) | |
Vicat Softening Temp. | | | |||||
| | | | | | | |
| | | | | | | |
熱變形溫度 H.D.T | | | | | | | |
Annealed(85℃,8hr) | ASTM D648 | | 1/4”,120℃/hr | | ℃ (℃) | 97(207) | |
Unannealed | | | | | | | 87(189) |
| | | | | | | |
燃燒率 | UL 94 | | | - | | - | 1.5mm HB |
Flammability | | | | ||||
| | | | | |
| |
在线问
