- 商品
- 详情
- 医疗级产品特性
- 否是否进口
- 西班牙产地
西班牙ELIX医疗级ABS塑胶原料M203FC高流动，高光泽度，适用于呼吸器，自动注射器、医疗设备外壳。
ABS M203FC物性表：
| Physical | Nominal Value | Unit | Test Method |
Density (25°C) | 1.05 | g/cm³ | *** 1183 |
Melt Mass-Flow Rate (MFR) (230°C/3.8 kg) | 12 | g/10 min | ASTM D1238 |
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg) | 31 | cm³/10min | *** 1133 |
Molding Shrinkage 2 | *** 294-4 | ||
Across Flow | 0.40 to 0.70 | % | |
Flow | 0.40 to 0.70 | % | |
| Mechanical | Nominal Value | Unit | Test Method |
Tensile Modulus 3 | 2400 | MPa | ASTM D638 |
Tensile Modulus | 2400 | MPa | *** 527-1/1 |
Tensile Strength 3 (Yield) | 42.7 | MPa | ASTM D638 |
Tensile Stress (Yield) | 46.0 | MPa | *** 527-2/50 |
Tensile Strain (Yield) | 2.6 | % | *** 527-2/50 |
Tensile Elongation 3 (Break) | > 15 | % | ASTM D638 |
Tensile Strain (Break) | > 15 | % | *** 527-2/50 |
Flexural Modulus 4 | 2400 | MPa | ASTM D790 |
Flexural Modulus 5 | 2400 | MPa | *** 178 |
Flexural Stress 5 | 70.0 | MPa | *** 178 |
| Impact | Nominal Value | Unit | Test Method |
Charpy Notched Impact Strength | *** 179/1eA | ||
-30°C | 7.0 | kJ/m² | |
23°C | 15 | kJ/m² | |
Charpy Unnotched Impact Strength | *** 179/1eU | ||
-30°C | 90 | kJ/m² | |
23°C | 110 | kJ/m² | |
Notched Izod Impact | ASTM D256 | ||
-30°C, 3.20 mm | 110 | J/m | |
23°C, 3.20 mm | 200 | J/m | |
23°C, 6.40 mm | 150 | J/m | |
Notched Izod Impact Strength | *** 180/1A | ||
-30°C | 7.0 | kJ/m² | |
23°C | 15 | kJ/m² | |
| Hardness | Nominal Value | Unit | Test Method |
Ball Indentation Hardness | 110 | MPa | *** 2039-1 |
| Thermal | Nominal Value | Unit | Test Method |
Deflection Temperature Under Load (0.45 MPa, Annealed) | 98.0 | °C | *** 75-2/B |
Deflection Temperature Under Load (1.8 MPa, Annealed) | 94.0 | °C | *** 75-2/A |
Vicat Softening Temperature | 98.9 | °C | ASTM D1525 6 |
Vicat Softening Temperature | 99.0 | °C | *** 306/B50 |
CLTE - Flow (23 to 55°C) | 9.0E-5 | cm/cm/°C | *** 11359-2 |
| Electrical | Nominal Value | Unit | Test Method |
Surface Resistivity | 1.0E+15 | ohms | IEC 60093 |
Volume Resistivity | 1.0E+15 | ohms·cm | IEC 60093 |
Electric Strength (1.00 mm) | 35 | kV/mm | IEC 60243-1 |
Relative Permittivity | IEC 60250 | ||
100 Hz | 3.00 | ||
1 MHz | 2.90 | ||
Dissipation Factor | IEC 60250 | ||
100 Hz | 5.0E-3 | ||
1 MHz | 9.0E-3 | ||
Comparative Tracking Index (Solution A) | 600 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
Burning Rate 7 (2.00 mm) | 60 | mm/min | *** 3795 |
Glow Wire Flammability Index (2.0 mm) | 700 | °C | IEC 60695-2-12 |
在线问
- 医疗级
- 否
- 西班牙
- 西班牙ELIX
- M203FC
- 品牌经销
- 标准料
- 医疗级ABS
- 注塑级
- 高流动、 高光泽
- 医用级
- 西班牙ELIX
- 医疗级
