供应沙伯ASA HRA170-BR6F013

¥32.00 ≥25千克起批

参数

沙伯基础(原GE)厂家(产地)
XTWE270牌号
品牌经销销售方式

发货地广东广州 1天内发货供货总量2000千克

广州华灿塑料科技有限公司: 进入店铺在线咨询

沙伯基础SABIC ASA/PC GELOY HRA222塑料合金树脂阻燃耐候抗UV 耐高温 ¥30.00

供应ASA/PC 沙伯基础塑料XP4034 BK SABIC注塑级抗静电耐候 ¥55.00

Sabic PC/ASA沙伯基础GELOY XP4034耐候耐高温耐老化抗紫外线 ¥25.00

无卤阻燃级ASA/PC 美国沙伯基础 SABIC Geloy HRA222F UL746C等级F1 ¥39.00

SABIC沙伯基础塑料PBT VALOX SHF4330 GF15%流动性高低翘曲PBT+ASA ¥28.00

Sabic沙伯基础ASA/PC GELOY XP4025热稳定性耐候ASA ¥31.00

产品详情

GELOY HRA170 is a high heat resistant ASA+PC. It shows high impact retention, which can be positioned for various outdoor and indoor applications requiring superior heat aging properties and colour stability.

Property

TYPICAL PROPERTIES⁽¹⁾
MECHANICAL	Value	Unit	Standard
Taber Abrasion, CS-17, 1 kg	95	mg/1000cy	SABIC Method
Tensile Stress, yield, 5 mm/min	55	MPa	ISO 527
Tensile Stress, break, 5 mm/min	60	MPa	ISO 527
Tensile Stress, yield, 50 mm/min	62	MPa	ISO 527
Tensile Stress, break, 50 mm/min	62	MPa	ISO 527
Tensile Strain, yield, 5 mm/min	5	%	ISO 527
Tensile Strain, break, 5 mm/min	125	%	ISO 527
Tensile Strain, yield, 50 mm/min	4	%	ISO 527
Tensile Strain, break, 50 mm/min	>50	%	ISO 527
Tensile Modulus, 1 mm/min	2500	MPa	ISO 527
Flexural Stress, yield, 2 mm/min	85	MPa	ISO 178
Flexural Modulus, 2 mm/min	2400	MPa	ISO 178
Hardness, H358/30	106	MPa	ISO 2039-1
Hardness, Rockwell R	120	-	ISO 2039-2
IMPACT	Value	Unit	Standard
Izod Impact, notched 80104 +23°C	60	kJ/m²	ISO 180/1A
Izod Impact, notched 80104 -30°C	15	kJ/m²	ISO 180/1A
Charpy 23°C, V-notch Edgew 80104 sp=62mm	60	kJ/m²	ISO 179/1eA
Charpy -30°C, V-notch Edgew 80104 sp=62mm	12	kJ/m²	ISO 179/1eA
THERMAL	Value	Unit	Standard
Thermal Conductivity	0.2	W/m-°C	ISO 8302
CTE, 23°C to 60°C, flow	8.E-05	1/°C	ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C	PASSES	-	IEC 60695-10-2
Vicat Softening Temp, Rate B/50	129	°C	ISO 306
Vicat Softening Temp, Rate B/120	132	°C	ISO 306
HDT/Be, 0.45MPa Edgew 120104 sp=100mm	121	°C	ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120104 sp=100mm	112	°C	ISO 75/Ae
PHYSICAL	Value	Unit	Standard
Mold Shrinkage on Tensile Bar, flow (2)	0.4 - 0.6	%	SABIC Method
Density	1.15	g/cm³	ISO 1183
Water Absorption, (23°C/sat)	0.6	%	ISO 62
Moisture Absorption (23°C / 50% RH)	0.2	%	ISO 62
Melt Volume Rate, MVR at 260°C/5.0 kg	17	cm³/10 min	ISO 1133
ELECTRICAL	Value	Unit	Standard
Volume Resistivity	>1.E+15	Ohm-cm	IEC 60093
Surface Resistivity, ROA	>1.E+15	Ohm	IEC 60093
Dielectric Strength, in oil, 3.2 mm	17	kV/mm	IEC 60243-1
Relative Permittivity, 1 MHz	2.8	-	IEC 60250
Dissipation Factor, 1 MHz	0.013	-	IEC 60250
Comparative Tracking Index	225	V	IEC 60112
FLAME CHARACTERISTICS	Value	Unit	Standard
UL Compliant, 94HB Flame Class Rating (3)(4)	1.6	mm	UL 94 by GE
Glow Wire Flammability Index 750°C, passes at	3.2	mm	IEC 60695-2-12
Oxygen Index (LOI)	22	%	ISO 4589

Source GMD, last updated:01/31/2001

Processing

Parameter
Injection Molding	Value	Unit
Drying Temperature	100 - 110	°C
Drying Time	2 - 4	hrs
Maximum Moisture Content	0.02	%
Melt Temperature	260 - 290	°C
Nozzle Temperature	240 - 280	°C
Front - Zone 3 Temperature	250 - 290	°C
Middle - Zone 2 Temperature	250 - 290	°C
Rear - Zone 1 Temperature	230 - 260	°C
Hopper Temperature	60 - 80	°C
Mold Temperature	60 - 90	°C