英勒科HRSG-48VDC-4H闪光继电器型号齐全选择
¥50.00
HRSG-24VDC-2Z英勒科闪光继电器型号分类及含义
¥70.00
RSG-1D/DC48V英勒科闪光继电器负载电流2A
¥100.00
英勒科RZB-224D/220V AC防跳继电器内部接线图
¥100.00
HRSG系列闪光继电器用于信号指示，当被保护系统发生故障，主保护继电器动作时，通过闪光继电器
的触点控制各种灯光信号。
Used for signal indication, HRSG Series Of flasher relay can control different light signals through itscontacts when the main protection relays are activated in case of malfunction of the system.
额定电压NominalVoltage:24VDC、48VDC、110V、220V(DC/AC)
触点形式ContactArrangement:2H2D、4H、4D、2Z、4Z
闪光频率为每分钟40-100次Flashfrequency shall be 40-100times/minute
在额定电压下功率消耗直流不大于7W交流不大于12VAPowerconsumption shallbelessthan 7WforDCand 12VAforAC.
触点容量ContactCapacity:在电压不大于250V时:触点长期接通电流为5A;在电压不大于250V时:电路时间常数L/R为5mS的
直流电路中，触点断开容量为50W;在电压不大于250V时:功率因数COS$为0.4的交流电路中，触点断开容量为250VA。
When the voltage is less than 250V, the continuous current o f the contacts is 5A; When the voltage is less than 250V and time
constant L/Ris 5mS in the DC circuit, the switching capacity of the contacts is 50W;When the voltage is less than 250V and the
power factor COs $ is 0.4 in the AC circuit, the switching capacity of the contacts is 250VA.
介质强度DielectricStrength:继电器各引出端子与外壳之间，应能承受50Hz、2KV，历时1分钟耐压试验而无击穿或闪络现象
50Hz, 2KV, 1 minute between each of the contactsand the casing, and no sign of breakdown or flashover is detected
环境温度AmbientTemperature:-10°℃~55C
U型35导轨安装MountingOn profile railTypeU35
HRSG- 220VDC- 2H2D
① ② ③
①HRSG系列闪光继电器 HRSGSeries Of FlasherRelay
② 额定线圈电压Nominal CoilVoltage:
24VDC、48VDC、110V、220V(DC/AC)
③触点形式ContactArrangement:2H2D、4H、4D、2Z、4Z
五、外形尺寸图
在线问
