福斯水基薄膜润滑剂FUCHS GLEITMO 603 透明白色水性润滑油

¥1240.00 ≥1桶起批

参数

福斯品牌
德国、上海产地
否是否进口

发货地广东深圳不限

深圳市恒旺利贸易有限公司 4年: 进入店铺在线咨询

福斯水溶性合成金属成型润滑油RENOFORM SYN 4500 4333 3 拉伸液 ¥1150.00

嘉实多Castrol Cooledge ABF 5 12水溶性切削液半合成金属加工液 ¥480.00

福斯FUCHS STABYL ECO MEP 2 ECO S 12 G环保滚子轴承黄油润滑脂 ¥1100.00

道达尔复合铝基钻具螺纹脂TOTAL TIFORA TJ 金属螺纹咬死润滑脂 ¥1050.00

道达尔TOTAL TRANSMISSION XRD FE SAE 75W-90合成车辆齿轮油GL-5 ¥950.00

福斯GEARMASTER ZSA FUCHS UERTHYN GE00高速齿轮轴承黄油润滑脂 ¥1100.00

产品详情

德国福斯HMP薄膜润滑剂FUCHS GLEITMO 603 透明白色薄膜润滑油

GLEITMO 603

Dry Solid Film Lubricant

Performance Features

temperature range of the dry film: -40 / +80 °C
meets the requirements of the automotive industry with a specific friction coefficient of =0.10-0.18 for screw lubricants
provides a transparent, touch-proof and abrasion-resistant lubricating film
suitable for mass parts
saves assembly time and is especially suited for automatic bolting systems
clean and non-greasing
has a very good surface adhesion on a lot of materials
environmentally and user friendly
contains a UV additive for a UV coating inspection (340 – 380 nm)

Description

GLEITMO 603 is a suspension of high-molecular polymers in water. GLEITMO 603 is used as a coating agent and develops a well adhering, touch-proof lubricating film after drying. GLEITMO 603 has been developed to achieve defined friction properties with a minimum variation range.

Field of application

GLEITMO 603 is used for mass-part coating. A typical application example is the coating of screws/bolts and nuts where a higher friction coeffi-cient range of = 0.10 - 0.18 is required.

Method of application

Subject to the requirements, GLEITMO 603 can be diluted in water (at least drinking water quality). As a rule, GLEITMO 603 is used in coating baths at dilution ratios of 1 : 3 (for centrifuges) up to app. 1 : 7 (for dipping).
The parts to be coated must be free of grease. Drums and centrifuges commonly used in the galvanising industry have proved to be very convenient in case of large coating quantities. After the coating process it is recommended to dry the parts by hot air (up to a part temperature of approximately 70 °C). Additional information regarding coating and bath maintenance is included in our Technical Information for GLEITMO 603.