取消

光模块 100 Gb/s CFP2 LR4 Transceiver

参数
  • 恒创(HC)品牌
  • CP2-27B4-10D 型号
  • LC口等等接口类型
广西 桂林 7天内发货 3000000个
桂林恒创光电科技有限公司
进入店铺 在线咨询
产品详情

CP2-27B4-10D                                          

  100 Gb/s CFP2 LR4 Transceiver

 

         PRODUCT FEATURES  

         Compliant with 100GBASE-LR4

         Support line rates from 103.125 Gbps to 111.81 Gbps

         Integrated LAN WDM TOSA / ROSA for up to 10 km reach over SMF

         Digital Diagnostics Monitoring Interface

         Duplex LC optical receptacle

         No external reference clock

         Single 3.3 V power supply

         Case operating temperature range:0°C to 70°C 

         Power dissipation < 6W

 



         Local Area Network (LAN)

         Data Center

         Ethernet switches and router applications

 

         STANDARD

         Compliant to IEEE 802.3ba

         Compliant to CFP MSA CFP2 Hardware Specification

         Compliant to CFP MSA Management Interface Specification

 

         General Description

HC 100G CFP2 LR4 optical Transceiver integrates receiver and transmitter path on one module. In the transmit side, four lanes of serial data streams are recovered, retimed, and passed to four laser drivers. The laser drivers control four EMLs (Electric-absorption Modulated Lasers) with center wavelength of 1296 nm, 1300nm, 1305nm and 1309 nm. The optical signals are multiplexed to a single –mode fiber through an industry standard LC connector. In the receive side, the four lanes of optical data streams are optically de-multiplexed by the integrated optical de-multiplexer. Each data stream is recovered by a PIN photo-detector and transimpedance amplifier, retimed. This module features a hot-pluggable electrical interface, low power consumption and MDIO management interface.

 

The module provides an aggregated signaling rate from 103.125 Gbps to 111.81 Gbps. It is compliant with IEEE 802.3-2012 Clause 88 100GBASE-LR4 and ITU-T G.959.1-2012-02, and OIF2010.404.08 CEI-28G-VSR electrical specifications. The MDIO management interface complies with IEEE 802.3-2012 Clause 45 standard. The transceiver complies with CFP MSA CFP2 Hardware Specification Rev. 1.0, CFP MSA Management Interface Specification Rev. 2.2, and OIF CEI-28G-VSR standards. A block diagram is shown in Figure 1.


为您推荐
产品分类 更多 >
供应商网> 传输、交换设备> 光纤收发器> 光模块 100 Gb/s CFP2 LR4 Transceiver
    在线问
    产品参数
    1/2
    面议 在线咨询
    进店 电话 在线咨询 获取最低报价
    光模块 100 Gb/s CFP2 LR4 Transceiver
    ¥面议
    • 采购产品
    • 采购数量
    • 联系电话
    《服务条款》 并允许推荐更多供应商为您服务
    请阅读并同意《服务条款》