进口T型过滤器
进口T型过滤器产品描述:
美国《LAINE》莱恩-进口T型过滤器,也叫T型除污器,是管道输送液体过程中清除固体杂质的设备。液体流经过滤器时,其中的杂质被滤出,可保护机泵、压缩机、仪表和其它设备正常工作。当需要清洗时,只要将可拆卸的滤筒取出,去除滤出的杂质后,重新装入即可,使用维护极为方便。
American Laine Lane - imported T-type filter, also known as T-type cleaner, is the equipment to remove solid impurities in the process of pipeline transportation of liquid. When the liquid flows through the filter, the impurities are filtered out, which can protect the normal operation of pumps, compressors, instruments and other equipment. When cleaning is needed, just take out the detachable filter cartridge, remove the impurities filtered out, and then install it again, which is very convenient for use and maintenance.
T型过滤器广泛应用于蒸汽、空气、水、油品等多种介质的管线中,保护管线系统上各种设备。如水泵、阀门等,免受管道内的铁锈、焊渣等杂物带来对管道的堵塞和损坏。T型过滤器还分直流式和折流式,具有抗污性能强,排污方便,流通面积大,压力损失小,结构简单,体积小等特点。T型过滤器的过滤网材质均是不锈钢,耐腐蚀性强。
T-filter is widely used in the pipelines of steam, air, water, oil and other media, protecting various equipment in the pipeline system. Such as water pump, valve, etc., to avoid the pipeline from rust, welding slag and other debris caused by the pipeline blockage and damage. T-filter is also divided into DC type and folding type, which has the characteristics of strong anti pollution performance, convenient sewage discharge, large circulation area, small pressure loss, simple structure and small volume. The filter screen of T-type filter is made of stainless steel and has strong corrosion resistance.
进口T型过滤器性能参数:
1.公称通径:DN15-DN600
2.公称压力:1.0Mpa-6.4Mpa
3.适用温度:-20℃≤T≤425℃
4.适用介质:水、油、气、蒸汽
5.阀体材质:铸钢、碳钢、不锈钢
6.连接方式:法兰连接
进口T型过滤器产品选型:
1、进出口通径:
原则上过滤器的进出口通径不应小于相配套的泵的进口通径,一般与进口管路口径一致。
2、公称压力:
按照过滤管路可能出现的压力确定过滤器的压力等级。
3、孔目数的选择:
主要考虑需拦截的杂质粒径,依据介质流程工艺要求而定。各种规格丝网可拦截的粒径尺寸查下表“滤网规格”。
4、过滤器材质:
过滤器的材质一般选择与所连接的工艺管道材质相同,对于不同的服役条件可考虑选择铸铁、碳钢、低合金钢或不锈钢材质的过滤器。
5、过滤器阻力损失计算
水用过滤器,在一般计算额定流速下,压力损失为0.52~1.2kpa