取消

联合宇光科技-台湾宇瞻apacer工业级SATA SSD 1.8寸mirco sata 接口

参数
  • Apacer/宇瞻品牌
  • SAFD18P-M型号
  • 1.8英寸硬盘尺寸
广东 深圳 7天内发货 1000000块
深圳市联合宇光科技有限公司
进入店铺 在线咨询
产品详情

简介   

  




 


Apacer, in consideration of cost and capacity for customers, introduces the MLC (Multi-Level Cell) offerings with cost structure advantage, SAFD 18P-M. The SAFD 18P-M features a cost-effective MLC (multi-level cell) flash memory and a built-in 7+9 pin SATA connector. It has maximum capacities of 16GB, 32GB, 64GB,128GB and 256GB, with sequential read/write speeds reaching up to 250 and 165 MB/sec, respectively. To work normally in harsh operating environments, Apacer SAFD 18P-M employ the flash vendor guaranteed wide-temp chip, which means it can run stably under industry-level extended-temperature (-40°C ~ 85°C) environments for the highest reliability and longest lifespan. And also, it boasts a built-in S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) technology and intelligent power failure recovery function to safeguard data and enhance product stability.


突出显示 

  

Perfect replacement of 1.8 inch SATA HDDs

Global Wear-leveling and Block Management

Built-in ATA Secure Erase and S.M.A.R.T. Functions

Power Failure Recovery

Trim Command Support

MLC Extended Temperature Support 


规格  

  

  

型号 SAFD 18P-M  

接口 SATA 2.0 (3Gb/s)   

连接器 (7+9) pin male  

外形(英寸) 1.8  

NAND闪存类型 MLC  

容量 16GB~256GB  

持续读取能力(MB/秒) Up to 250  

持续写入能力(MB/秒) Up to 165  

ECC支持 Built-in hardware ECC, enabling up to 16/24 bit correction per 1K bytes  

标准工作温度 0 ~ + 70   

扩展工作温度 ( °C ) -40 ~ + 85*

(*=Supports 32GB~256GB)

  

存储温度 -40 ~ + 100  

冲击 50G  

振动 15G  

湿度 5%~95%  

工作电压 3.3V & 5V  

低功耗 Active mode(Max): 819mA & Idle mode: 194mA  

尺寸(mm) 78.3(L)x54(W)x5(H) 


 


 


为您推荐
产品分类 更多 >
供应商网> 电脑硬件及配件> 固态硬盘> 联合宇光科技-台湾宇瞻apacer工业级SATA SSD 1.8寸mirco sata 接口
    在线问
    产品参数
    1/1
    面议 在线咨询
    进店 电话 在线咨询 获取最低报价
    联合宇光科技-台湾宇瞻apacer工业级SATA SSD 1.8寸mirco sata 接口
    ¥面议
    • 采购产品
    • 采购数量
    • 联系电话
    《服务条款》 并允许推荐更多供应商为您服务
    请阅读并同意《服务条款》