JBC DMPSE-Q可管理4个工具的带电动泵DME焊台-重庆内藤naitokikai
DMPSE-Q
可管理 4 个工具的带电动泵 DME 焊台
DME 同时管理多达 4 个工具,并且完全兼容 10 种不同的 JBC 工具。请查看以下兼容工具的完整列表。
MSE 电动脱焊模块在整个脱焊过程中***。
凭借 JBC 的效焊接系统和额外的睡眠和休眠模式,有助于延长焊嘴的寿命,它能提供的焊接质量。
它具有所有 Excellence 系列的优点,如焊台定制,完全控制焊接过程和远程工作管理。
尽管控制单元与 10 种不同的 JBC 工具兼容,DMPVE 与 T210 ******手柄、AM120 微型镊子和 DR560 脱焊焊铁一起工作。
产品构成
工具
吸锡手柄,***用途手柄,通用型手柄,Adjustable Micro Tweezers
焊台
Stand for DR560,Cartridge Holder,Stand for T210 & T245 Handles
清洁系统
***安全焊嘴清洁机
技术参数
AC适配器:
18.9 x 14.6 x 15.0 in / 32.43 lb
环境工作温度:
10 to 40 C / 50 to 104 F
流量:
9 SLPM
局域网(以太网):
Remote control / Traceability
峰值功率:
160 W per tool 23.5 V
焊嘴与接地间电阻:
<2 ohms
焊嘴与接地间电压:
<2 mv rms
真空:
75% / 570 mmHg / 22.4 inHg
Selectable Temperature:
90 to 450 C / 190 to 840 F
Max. and min. temperature:
Limit the temperature range in which the operator is allowed to work.
Voltage (AC):
ref. DMPSE-1QA - 120 V
Package:
480 x 370 x 380 mm / 14.71 kg
Temperatue levels:
Instant selection of up to 3 editable temperature settings for solder joints with different heat requirement.
PIN protection:
Keep station parameters protected against unauthorized access.
Sleep and Hibernation mode:
These modes lower soldering tip temperature when the tool rests in the stand in order to avoid oxidation and extending tip life.
USB-B (rear):
Software PC / Traceability
USB-A (front):
Firmware update.
Robot:
RS-232 remote control orSmart Fume Extractorconnection
Dynamic Soldering Profiles:
Designed to avoid thermal shock when soldering Ceramic Chip components like MLCC, this new and unique feature allows controlling the heating ramp up rate of the tool to gradually increase the temperature of the
Soldering graphics:
Real time visualization of tip temperature and power delivered to the solder joint during soldering process.
10 user interface languages:
English, German, Spanish, French, Italian, Portuguese, Russian, Japanese, Korean, Chinese.
PS:
Interconnection of up to 5PSE control unitsto manage up to 24 tools simultaneously.
Dimensions/Net weight:
See individual modules