沙特SABIC HDPE M200056高流动尺寸稳定
¥17.00
沙特SABIC HDPE M300054高流动低翘曲
¥17.00
沙特SABIC HDPE M80064S抗紫外线低翘曲
¥17.00
高刚低翘曲HDPE M80064沙特SABIC
¥17.00
沙特SABIC HDPE CC254高刚度增韧
¥17.00
雪佛龙菲利普HDPE Marlex 9004高刚高抗冲
¥17.00
沙特SABIC HDPE M200050高流动高光泽
Density / Specific Gravity | 950 | g/cm³ | ASTM D792 |
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 17 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
Tensile Strength | ASTM D638 | ||
Yield, Injection Molded | 22.0 | MPa | |
Break, Injection Molded | 6.00 | MPa | |
Tensile Elongation (Break, Injection Molded) | 120 | % | ASTM D638 |
Flexural Modulus (Injection Molded) | 620 | MPa | ASTM D790 |
Flexural Strength (Injection Molded) | 20.0 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
Vicat Softening Temperature | 124 | °C | ASTM D1525 |
在线问
