上海科麦减速机出口到各个国家。如选型需咨询,24小时热线:13671556859
上海科麦传动设备有限公司WPX系列铸铁蜗轮蜗杆减速机特点:
WPX铸铁蜗轮蜗杆减速机特点:
1、传动平稳、振动、冲击和噪音均小,减速比大,通用性广,能与各种机械设备配套使用。
2、能以单级传动获得较大的传动比,结构紧凑,大部分型号减速机有较好的自锁性,对有制动要求的机械设备能节省制动装置。
3、蜗杆螺牙与蜗轮齿面的啮合摩擦损耗较大,因此传动效率要比齿轮低,容易发热和温度较高。
4、对润滑和冷却要求较高一些。
5、互配性好,蜗轮蜗杆均按国家的标准制造,轴承、油封等均用标准件。
6、箱体型式有基本型(箱体为带有底脚板的立式或卧式两种结构)和##型(箱体为长方体,多面设有固定螺孔,不带底脚板或另装底脚板等多种结构型式)
7、输入轴联接方式有基本型(单输入轴及双输入轴)、带电机法兰两种。
8、输出、输入轴位置方向有输入轴在下及在上;输出轴向上及向下;输入轴向上及向下。
9、可用2台或3台减速机组成多级减速机,以获得***的传动比。
WPX cast iron worm gear reducer features:
1. Stable transmission, low vibration, impact and noise, large reduction ratio and wide universality. It can be used together with various mechanical equipment.
2. It can obtain large transmission ratio with single-stage transmission and compact structure. Most types of reducers have good self-locking performance, and can save braking devices for mechanical equipment with braking requirements.
3. The meshing friction loss between worm teeth and worm gear tooth surface is large, so the transmission efficiency is lower than that of gear, easy to heat and high temperature.
4. Higher requirements for lubrication and cooling.
5. Good compatibility, worm gears and worms are manufactured according to national standards, and standard parts are used for bearings and oil seals.
6. The box type includes basic type (the box body is vertical or horizontal structure with baseboard) and ## type (the box body is rectangular, with fixed screw holes on many sides, without baseboard or with baseboard)
7. There are two connection modes of input shaft: basic type (single input shaft and double input shaft) and with motor flange.
8. The position direction of the output and input shaft has the input shaft at the bottom and at the top; Output axial up and down; Input axial up and down.
9. Two or three reducers can be used to form a multi-stage reducer to obtain a great transmission ratio.