LOCTITE® AA 325™ provides the following product characteristics: Technology Acrylic Chemical Type Modified acrylic ester Appearance (uncured) Clear, dark brown liquidLMS Components One component - requires no mixing Viscosity Medium Cure Anaerobic with activator Cure Benefit Room temperature cure Application Bonding LOCTITE® AA 325™ typical applications include bonding metal or ceramic close fitting rigid parts which are exposed to thermal cycling, e.g. electric motor assemblies. LOCTITE® AA 325™ cures when confined between close fitting parts with the aid of an activator. TYPICAL PROPERTIES OF UNCURED MATERIAL Specific Gravity @ 25 °C 1.1 Flash Point - See SDS Viscosity, Brookfield - RVT, 25 °C, mPa·s (cP): Spindle 6, speed 20 rpm, 14,000 to 25,000LMS TYPICAL CURING PERFORMANCE Cure Speed vs. Substrate The rate of cure will depend on the substrate used. The graph below shows the shear strength developed with time on grit blasted steel lap shears compared to different materials and tested according to *** 4587. (Activator 7075™ applied to one surface)