本店商品均不含税点金额,如需开发票请咨询客户添加税点,如直接备注开票未咨询客服+税点的,本店有权不开发票。
***代EMC防电磁屏蔽电缆接头
These EMC cable glands combine several advantages in one product. First, you get the same clamping ranges as the standard brass glands. The protection class is IP68. In order to get a low electrical impedance between the cable gland and the braiding of the cable the cable gland does not have to be disassembled. Secondly, a perfect shielding will be achieved by just tightening the dome nut. This high tech cable gland consists of a nickel plated brass body, PA6 clamping insert, an EMC contact element and choloprene seal. The components are pre-assembled.
To install an EMC cable gland remove approx. 5 – 10 mm (0.20 – 0.39) of the insulation of the cable. Insert the cable in to the cable gland and adjust it without the contact elements touching the braiding. Tighten the cap and conductivity will be established. The design of the contact elements will adapt to different cable diameters according to the clamping range of the cable glands. Since the clamping insert of the cable gland is as long as the gland itself electrical shortcuts between the body and individual wires will be avoided.
TechnicalDetails |
||
Material |
||
Body |
Brass,Nickelplated |
|
Cap |
Brass,Nickelplated |
|
ContactSpr. |
SpecialCopperAlloy |
|
Clamp.Insert |
Polyamide6V2 |
|
Seal |
Chloroprene |
|
O-ring |
NBR |
|
OperatingTemperature |
||
Permanent |
-20°Cupto+100°C |
|
Intermittent |
-40°Cupto+150°C |
|
Benefits |
||
Suitableforhighestdemandsoftodaystechnology |
||
Easytoassemble |
||
Easyhandling |
||
Watertight |
||
Strainrelief |
||
Accessories |
||
Locknuts |
||
Remarks |
||
ManufacturedaccordingtotherequirementsofEN50262 |