3M™ Heat Shrink Tubing FP-301 热缩管收缩比2:1

面议

参数

否是否进口
美国产地
否加工定制

发货地上海松江区 7天内发货供货总量1000根

海郑实业（上海）有限公司: 进入店铺在线咨询

3M QS1000-W 8.7/15kV 冷缩式防水增强型电缆中间接头面议

3M QS1000-II-W 8.7/15kV 冷缩式防水增强型电缆中间接头3*150-240MM2 面议

3M QS1000-III-W 冷缩式防水增强型电缆中间接头3*300-500MM2 面议

赛晶高压并联电力电容器面议

91-NBA系列 1KV冷缩中间绝缘防水灌胶接头面议

LVI3/X-IC系列电缆中间接头面议

产品详情

3M™ Heat Shrink Tubing FP-301 Flexible, Polyolefin 热缩管 2：1收缩比

3M™ Heat Shrink Tubing FP-301 offers an excellent balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. Rated for 135°C continuous operation, all 3M FP-301 tubing is split resistant, mechanically tough, easily marked and resists cold flow. 3M FP-301 tubing is rated for continuous operation at -55°C (-67°F) to 135°C (275°F), and is designed to withstand elevated temperatures to 300°C (572°F) for short periods. Minimum shrink temperature for all 3M FP-301 tubing is 100°C (212°F)

Agency Approvals & Self Certifications

Meets requirements of:

• AS23053/5, Class 1, Class 2 (Clear)*

• UL Recognized, File E-39100, at 600 volts maximum @ 125°C

• CSA Certified, CSA LR38227, at 600 volts maximum @ 125°C

• For RoHS and REACH information, please visit /regs

*Formerly MIL-I-23053/5, MIL-DTL-23053/5 and SAE-AMS-DTL-23053/5

Applications

3M FP-301 tubing is typically used as a shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire-resistant covering.

Shrink Ratio

3M FP-301 tubing has a 2:1 shrink ratio. When freely recovered, the tubing will shrink to 50% of its as-supplied internal diameter. The recovered wall thickness is proportional to the degree of recovery