高抗冲K（胶）/KR-05韩国菲利普/树脂材料
¥18.00
韩国菲利普K胶KK-38挤出/透明/韧性好
¥18.00
FDA食品认证K胶XK-40韩国菲利普/高光泽度 高透明
¥18.00
PA66美国杜邦ST801A（ 抗紫外线ST801A）
¥28.00
PA66聚酰胺尼龙FR50美国杜邦（FR50）阻然V0级
¥41.00
美国杜邦PA66 FR15 （阻燃无卤FR15 ）耐高温
¥42.00
K树脂 KR-03韩国菲利普(K胶)KR03/KR-03食品级
K树脂 KR-03韩国菲利普(K胶)KR03/KR-03食品级
K树脂 KR-03(K胶)韩国菲利普KR03/KR-03食品级
K-Resin SBC（K胶） KR03 很好清晰，表面光泽度高，很好的韧性，挺度好。菲利普 K-Resin SBC（K胶） KR03NW KR03NW是无蜡（NW）的KR03形式，以方便印刷。菲利普 K-Resin SBC（K胶） BK10 很好清晰，表面光泽度高，韧性很好，很好的刚度，高熔体流动。菲利普
K-Resin SBC（K胶） KR53 ***清晰，高表面光泽度，良好的热封性能，很好的韧性，挺度好，良好折叠属性。菲利普
K-Resin SBC（K胶） KR52 ***清晰，表面光泽度高，良好的热封性能，良好的刚度。菲利普
K-Resin SBC（K胶） KR05 很好清晰，表面光泽度高，韧性非常好，刚度好菲利普 K-Resin SBC（K胶） KR05NW KR05NW是无蜡（NW）的KR05形式，以方便印刷。菲利普 K-Resin SBC（K胶） XK44 好清晰，表面光泽度高，韧性好，不易变形，良好的成形性。
K-Resin SBC（K胶） DK11 ***清晰，表面光泽度高，良好的热封性能，韧性好，非常好刚度，良好折叠属性。菲利普
【英文全称】：K-Resin
【英文缩写】：K-胶
【中文全称】：苯乙烯—丁二烯共聚物
【组成单体】：胶
【基本特性】
1.物理性能:透明、无味、***、密度为1.01.比PS、AS低
Huayun Plastics Co. , Ltd. . K, also known as as a resin, is a styrene-butadiene copolymer SB, with good transparency, gloss, and impact resistance, and the price between PS and PC, therefore, widely used in the manufacture of non-fragile transparent products, such as: Cups, caps, bottles, hinged boxes, hangers, food and medical packaging and so on. K Rubber is made of styrene and Butadiene, polystyrene has high transparency, good processing performance, the drawback is brittle, and butadiene can be polymerized into rubber, elastic impact resistance, the two copolymerization, improved the shortcomings of polystyrene, the polymer with good comprehensive properties was obtained. K is amorphous polymer, good fluidity, and processing out of the products, smooth appearance, gloss, high transparency. Suitable for injection molding, blow molding, extrusion and other processing methods, can be in most ordinary equipment processing, do not need to change the equipment and mold. Expansion Data: Properties of K Adhesive 1. Thermal Properties: Because K adhesive is an amorphous polymer, its melting point is not obvious, the thermal deformation temperature is 77 °C, when the temperature is higher than 177 °c, the fluidity of the polymer increases, but higher than 260 °C, the fluidity becomes unstable, the barrel temperature is too high, or the residence time is too long in the medium temperature, the polymer will degrade, resulting in the appearance and performance of the products, such as transparency decline, color change, Brittle, etc. . 2. Optical Properties: K is an amorphous polymer, which has less interference with light than a dense crystalline polymer. Therefore, the turbidity is very low by 1-3% and the transparency is excellent by 89-91% , it is necessary to improve the surface finish of the die and select the best processing conditions. 4. Chemical Resistance: The Chemical Resistance of K adhesive is poor. Organic compounds such as alcohol, ketone, Ester, and aromatic compounds will soften and even dissolve the K compound, however, the rate and severity of erosion depends on the design and storage conditions of the product. Therefore, the compatibility of the actual product with k material should be tested.
在线问
