盐城、常州、苏州代理罗门哈斯AMBERJET UP6150

¥150.00 100 - 499升
¥145.00 ≥500升

参数

核级抛光树脂产品名称
鳌合酸碱性
90含量≥

发货地江苏苏州 7天内发货供货总量1000升

苏州西尔环保科技有限公司: 进入店铺在线咨询

苏州酚醛树脂代理清关,进口费用组成,进口报关代理 ¥300.00

法国罗地亚 A230 PA66树脂耐冲击罗地亚苏州代理 ¥29.00

LG亚克力树脂 PMMA HI-835M 韩国LG中国苏州代理商面议

RICOH理光树脂基碳带热转印碳带条码打印机理光碳带总代理 ¥28.00

PISCO碧士克真空吸盘吸痕防止型单树脂吸盘 VP10QKE 面议

ABS树脂苏州代理商塑料应用广泛性能好面议

产品详情

AMBERJET UP6150 is a fully regenerated mixed
bed of cation and anion exchange resins
intended for use in high purity water systems
after reverse osmosis. In properly designed Ultra
Pure Water systems, Amberjet UP6150 will
deliver 18 Megohm·cm quality water with TOC
levels well below 5 ppb on its first operating cycle
as a polishing mixed bed.
This mixed bed product is particularly suitable
for use in the polishing of high purity water for
specialty electronics applications such as the
manufacturing of disk drives, display devices, CDROMs,
discrete semiconductor devices, lower
density IC chips, or in the back-end chip dicing
and mounting operations. Because of its high
level of regeneration Amberjet UP6150 is also
suited for any general purpose mixed bed
applications for the economical production of
high purity water.
The component resins of AMBERJET UP6150
are uniform particle size Amberjet resins, and
their size was selected to provide excellent first
cycle mixed bed performance, while at the same
time allowing for future separation and
regeneration of the resins. The resins are mixed
to give a stoichiometric equivalent of cation and
anion exchange capacity, and the resin mixture
exhibits no clumping. The uniform particle size
of the resins maximizes kinetic performance in
the service cycle of the mixed bed, while still
allowing for later separation and regeneration.
All these characteristics are essential to produce
high purity water with a minimum volume of
rinsing.
BASIC RESIN PROPERTIES
For high purity regenerated mixed beds, UPW
performance is much more significant than basic
resin properties. It is still important to know that
the resins used in the application are of the
highest quality. The typical properties of the
resins used in AMBERJET UP6150 are shown
below.
These values are listed to show that both the
cation and anion resins used to make AMBERJET
UP6150 meet the standards for high capacity,
uniform particle size ion exchange resins.
Cation H + Anion OH
–
Moisture holding capacity, %_________________ 44.0 - 54.0 54.0 - 64.0
Total exchange capacity, eq/L ________________ ≥ 1.8 ≥ 1.00
Harmonic mean size, μm _____________________ 580 to 680 580 to 690
Uniformity coefficient _______________________ ≤ 1.20 ≤ 1.25
H form % of sites ________________________ ≥ 99 -
OH form % of sites ________________________ - ≥ 95.0
Cl form, % of sites ________________________ - ≤ 0.5
CO3 form % of sites ________________________ - ≤ 5.0
SO4 form % of sites ________________________ - ≤ 0.1

SUGGESTED OPERATING CONDITIONS FOR BEST RESULTS
(Product may be operated successfully outside these conditions, but results may not be optimum)
Feed water temperature______________________ 15 to 25°C (60 to 77°F)
Minimum bed depth ________________________ 900 mm (3 feet)
Service flow rate (working mixed bed) _________ 20 to 30 BV*/h
Service flow rate (polishing mixed bed) ________ 30 to 40 BV/h
Recommended influent water quality
for polishing mixed bed application
Inlet Resistivity ____________________________ > 16 MΩ·cm
Inlet Silica ________________________________<5 ppb
Inlet Total Organic Carbon _________________<20 ppb
* 1 BV (Bed Volume) = 1 m3 solution per m3 resin (1BV/h = 0.125 gpm/ft3)

离子交换树脂

罗门哈斯离子交换树脂(***整合型号说明）

罗门哈斯产品授权书

Amerlite HPR1200 Na

Amerlite HPR4200 CL

Amerlite IRC120 Na

Amberlite IRA402Cl

Amerlite HPR1100 Na

Amerlite HPR4800 CL

Amerlite IRA96

Amerlite HPR8300 H

AMBERJET UP6150