扬州代理美国罗门哈斯[抛光树脂UP6150]

面议

参数

抛光树脂产品名称
中性酸碱性
51含量≥

发货地江苏苏州 3天内发货供货总量5000升

苏州西尔环保科技有限公司: 进入店铺在线咨询

扬州超纯水抛光树脂再生哪些厂真诚推荐武汉市君奇慧科技供应面议

台湾中砂KFB树脂砂轮镜面抛光砂轮片 180*6*31.75 GC2000H ¥580.00

山东抛光研磨材料白刚玉砂树脂磨具用白刚玉 ¥5.50

混凝土环氧树脂耐磨地面固化剂打磨机环氧地面抛光机 ¥4100.00

徐州金属件除油锈六角滚筒抛光机树脂桃胶去杂质研磨机 ¥2400.00

金州供应732软水树脂 001*7阳离子交换树脂 25升起订 ¥5.50

产品详情

UP6150抛光树脂使用化工、电子、半导体、太阳能等超纯水行业

PROAMBERJET UP6150 is a fully regenerated mixed bed of cation and anion exchange resins intended for use in high purity water systems after reverse osmosis. In properly designed Ultra Pure Water systems, Amberjet UP6150 will deliver 18 Megohm·cm quality water with TOC levels well below 5 ppb on its first operating cycle as a polishing mixed bed. This mixed bed product is particularly suitable for use in the polishing of high purity water for specialty electronics applications such as the manufacturing of disk drives, display devices, CDROMs, discrete semiconductor devices, lower density IC chips, or in the back-end chip dicing and mounting operations. Because of its high level of regeneration Amberjet UP6150 is also suited for any general purpose mixed bed

applications for the economical production of high purity water. The component resins of AMBERJET UP6150 are uniform particle size Amberjet resins, and their size was selected to provide excellent first cycle mixed bed performance, while at the same time allowing for future separation and regeneration of the resins. The resins are mixed to give a stoichiometric equivalent of cation and anion exchange capacity, and the resin mixture exhibits no clumping. The uniform particle size of the resins maximizes kinetic performance in the service cycle of the mixed bed, while still allowing for later separation and regeneration. All these characteristics are essential to produce high purity water with a minimum volume of rinsing.

BASIC RESIN PROPERTIES For high purity regenerated mixed beds, UPW performance is much more significant than basic resin properties. It is still important to know that the resins used in the application are of the highest quality. The typical properties of the resins used in AMBERJET UP6150 are shown below.These values are listed to show that both the cation and anion resins used to make AMBERJET UP6150 meet the standards for high capacity, uniform particle size ion exchange resins.

Cation H + Anion OH –

Moisture holding capacity, %_________________ 44.0 - 54.0 54.0 - 64.0 Total exchange capacity, eq/L ________________ ≥ 1.8 ≥ 1.00

Harmonic mean size, µm _____________________ 580 to 680 580 to 690 Uniformity coefficient _______________________ ≤ 1.20 ≤ 1.25

H form % of sites ________________________ ≥ 99 - OH,form % of sites ________________________ - ≥ 95.0

Cl form, % of sites ________________________ - ≤ 0.5

CO3 form % of sites ________________________ - ≤ 5.0 SO4 form % of sites ________________________ - ≤ 0.1

Feed water temperature______________________ 15 to 25°C (60 to 77°F)

Minimum bed depth ________________________ 900 mm (3 feet)

Service flow rate (working mixed bed) _________ 20 to 30 BV*/h

Service flow rate (polishing mixed bed) ________ 30 to 40 BV/h

Recommended influent water quality

for polishing mixed bed application