抛光树脂科海思半导体行业超纯水制备树脂杜笙树脂MB-106UP

¥4.00 ≥1升起批

参数

高效产品特性
抛光树脂产品名称
混床树脂酸碱性

发货地北京丰台区 2天内发货供货总量43200升

科海思（北京）科技有限公司: 进入店铺在线咨询

科海思电镀废水除镍离子交换树脂工艺杜笙树脂CH-90 ¥3.00

科海思进口除六价铬树脂杜笙品牌产品含铬废水处理 ¥2.00

3铼回收树脂科海思贵金属回收树脂杜笙树脂RCX-514 ¥5.00

生活污水除磷滤料用于无机磷处理除磷滤料FERROLOX ¥2.00

杜笙树脂除硝酸盐科海思原装进口除硝酸盐树脂A-62MP ¥4.00

抛光树脂-科海思原装进口杜笙树脂-江苏超纯水制备 ¥3.00

产品详情

杜笙树脂Tulsimer^®MB-106UP

杜笙树脂产品详情

Tulsimer^® MB-106UP为高阶核子级抛光树脂, 是由核子级强酸型阳离子Tulsimer^® T-46Li 及核子级强碱型阴离子Tulsimer^® A-33OH 以1:2 体积比的剂量比例 , 预先混合的混床级离子交换树脂,专门提供给超纯水系统抛光用，具有高的交换容量及优越的物理特性。适合用于电子产业，生产半导体及映像管产业，实验室，激光，高精仪器，医用行业等需要超纯水的行业，以及核电厂等使用。在全球我们有数十家核电厂使用我们的抛光树脂。

杜笙树脂基本特性(YPICAL CHARACTERISTICS):Tulsimer^®MB-106UP

	Tulsimer^®T-46 (阳)	Tulsimer^®A-33 (阴)
型式(Type)	强酸性阳离子交换树脂 (Strong acid Cation exchange resin)	强碱性阴离子交换树脂 (Strong base Anion exchange resin)
主体结构(Matrix Structure)	苯乙烯(Cross linked polystyrene)	苯乙烯(Cross linked polystyrene)
功能基 (Functional Group)	磺酸基(Sulfonic acid)	季氨Ⅰ型(Quaternary ammonium Type I)
物理性貭(Physical Form)	球状颗粒(Moist spherical beads)	球状颗粒(Moist spherical beads)
离子型式(Ionic form supplied)	氢(Hydrogen)	氢氧(Hydroxide)
粒径范围(sh in wet)	16 to 50	16 to 50
粒度范围 (Particle Size)	0.3 to 1.2 mm	0.3 to 1.2 mm
微粒含量(Fines Content)	穿过US 50 Mesh小于0.5% (Less than 0.5% passing through 50 sh)	穿过US 50 Mesh小于0.5% (Less than 0.5% passing through 50 sh)
总交换容量 (Total Exch. Capacity)	1.8 meq/ml minimum of *** in hydrogen form	1.0 meq/ml minimum of 90% in hydroxide form and less than 1% in chloride form
PH范围 (pH Range)	0 to 14	0 to 14
允许温度 (Temp. Stability)	120°C	60°C
微粒含量(Fines Content)	穿过US 50 Mesh小于0.5% (Less than 0.5% passing through 50 sh)	穿过US 50 Mesh小于0.5% (Less than 0.5% passing through 50 sh)
总交换容量 (Total Exch. Capacity)	1.8 meq/ml minimum of *** in hydrogen form	1.0 meq/ml minimum of 90% in hydroxide form and less than 1% in chloride form
PH范围 (pH Range)	0 to 14	0 to 14
允许温度 (Temp. Stability)	120°C	60°C
溶解率 (Solubility)	Insoluble in all common solvents	Insoluble in all common solvents
溶出有机物(Organic leachable)	Less than 0.2 mg KMNO4 per ml of wet resin	Less than 0.2 mg KMNO4 per ml of wet resin
密度Backwash settled density	Approx.750 gm/liter	Approx.750 gm/liter
不纯物(Impurities)	Fe=50 ppm(max)	Fe=50 ppm(max)
	Cu=50 ppm(max)	Cu=50 ppm(max)
	Pb=50 ppm(max)	Pb=50 ppm(max)
球粒强度(Bead strength)	Avg. not less than 300g/bead by Chatillon test (ASTM Standard)