深圳市科瑞芯电子有限公司为ZOWIE智威正规代理商,商品原厂原装
供应台湾智威电容器SZ Cap系列——ZPCT2P5M471S,可为终端客户提供样品及技术支持!
原装現货热銷中,价格优勢,深圳市内可送货上门,欢迎致电!
型号:ZPCT2P5M471S
封装:SMT
数量:1800PCS/REEL
品牌:ZOWIE/智威
1. Polarity
This polymer aluminum electrolytic capacitor has polarity. Polarity must be identified before use. if the polarity is reversed, the leakage currentofthis capacitorwillincreaserapidly, evenmoreitwillmakethecircuitshort.
2. Voltage
The application of over-voltage will increase the leakage current, so that the capacitor will be damaged because of the rise of its interior temperature. The sum of DC voltage and ripple voltage should not exceed the rated voltage.
3. Temperature
The capacitor must be used in or under the rated temperature. Operation at temperatures exceeding specifications will cause large changes in electrical properties. The potential deterioration will also lead to the failure of the capacitor. When thinking about the operating temperature of the capacitor, be sure to include not only the ambient temperature but also interior heat coming from the components.
4. Ripple current
Use the capacitor in permitted ripple current. When excessive ripple current is applied to the capacitor, it will cause the increasement of leakage current, short circuits and decreasing in life.
5. Storage of capacitor
Capacitors should be stored in a moisture proof and without direct sunlight environment. The prefer temperature is 5C ~ 30C, relative humidity is lower than 60% RH.
Moisture Sensitivity Level: Level 3.
To maintain good mounting capability, please keep the capacitors in the state as delivered. Products should be all used within the storage term after opening the package. Please put the remaining products back into the packaging bag and seal the unsealed part with adhesive tape.
Storage term of the products: 24 months after manufactured (before opening the package), 7 days after opening. After the storage limit, drying treatment is necessary, condition: 50C土2C, 100h to 200 h.
6. Capacitor measurement
Excessive impact current resulted from charge and discharge hastily will cause the increasement of leakage current, even short circuit. Therefore the capacitor should be serially attached to a 1kQ protective resistor, and the applied voltage should be gradually increased to be equal to the rated voltage during the leakage current measurement. Before measuring other parameters, 1kQ resistor should be connected in series to make the capacitor discharge fully.
产品规格书(部分),如需PDF文档请QQ索要或电话联系
ZOWIE系列
Z3PK1045ULH /LX10M/SCD34H/SCD345H/Z3PK1550ULH/BSCD54DH/ MBR10100CFSH /SCD53H /MM3Z5231BH / P6KE200A / Z4GP20MLH /MSCD054H / MSCD104H / SCD34LH /SCD545UH /SCD34LH / SCD36H / SCD310H / SSCD204SH /SSCD304SH /SSCD106H /SCD54H / USCD034H / Z4GP20MLH /Z4GP40MLH /Z4GP60MH / LS50M / Z4RGP60MPH / KBP410G / SMBC306MH / SGC10MH / SRGC10MH / RGC10MH / RGC20MH/Z4GP20MLH/ Z4RGP30MPH
MSCD054H SSCD106H USCD034H MSCD104H MSCD204H MSCD104LH SSCD204SH SSCD304SH SCD34LH SCD34H SCD24H SCD36H SCD345H SCD310H SCD54H MSCD106H UGC10JH Z4GP40MLH SCD545UH SRGC10MH Z4GP40KLH SGC10MH RGC10MH SCD545H BYD167ZH Z4GP20JLH LS50M LXR30M UGC20JH Z4GP60MH Z3PK10100UH SGC10JH
MBCR10MPH LXR80M LXR30M Z4GP60MH Z4RGP60MPH Z4RGP30MPH Z4GP16MPH LX08M LX30M
LXR30M LX80M LXR80M ALX10MH SLX104MH SMBC104H SLX106UH SLX204MH SLX204MAH
SLX204UH SLX206UH LSR50M AUBGC20 AUBYD17 AUBYD57Z AUMGC10MH AUMSCD054H UGF10JH UGP50J UGP10J BYD187ZH BYD37ZH SUGC10JH