INCONEL® alloy 751 (UNS N07751) is a precipitation hardenable nickel-chromium alloy, used mainly for the exhaust valves of internal combustion engines. Its limiting chemical composition is shown in Table 1. The alloy has essentially the same excellent physical, mechanical and corrosion-resistance properties as INCONEL alloy X-750. Some physical constants for INCONEL alloy 751 are shown in Table 2. Its thermal properties correspond closely to those published for INCONEL alloy X-750. In the evaluation of materials for exhaust valve applications, nickel-chromium alloys have performed well in a 1675°F (913°C) lead oxide screening test. INCONEL alloy 751 repeatedly offered good results, with corrosion rates averaging 4.31 g/dm2 /h. Like other nickel-chromium alloys, INCONEL alloy 751 also resists attack by other exhaust stream impurities such assulfur, bromine and chlorine. Table 1 - Limiting Chemical Composition, % Nickel (+ Cobalt) ..........................................................70.0 min.Chromium....................................................................14.0-17.0 Iron ..................................................................................5.0-9.0 Titanium...........................................................................2.0-2.6 Aluminum ........................................................................0.9-1.5 Niobium (+ Tantalum) ......................................................0.7-1.2 Manganese ...................................................................1.0 max. Silicon ...........................................................................0.5 max. Sulfur ..........................................................................0.01 max.Copper..........................................................................0.5 max. Carbon........................................................................0.10 max. Publication Number SMC-083 Copyright © Special Metals Corporation, 2004 (Sept 04) INCONEL is a trademark of the Special Metals Corporation group of companies. The data contained in this publication is for informational purposes only and may be revised at any time without prior notice. The data is believed to be accurate and reliable, but Special Metals makes no representation or warranty of any kind (express or implied) and assumes no liability with respect to the accuracy or completeness of the information contained herein. Although the data is believed to be representative of the product, the actual characteristics or performance of the product may vary from what is shown in this publication. Nothing contained in this publication should be construed as guaranteeing the product for a particular use or application. Physical Constants and Thermal Properties Table 2 - Physical Constants & Thermal Properties Density, lb/in3.....................................................................0.297 g/cm3 ......................................................................8.22 Melting Range, °F .....................................................2540-2600 °C .....................................................1390-1430 Specific Heat, Btu/lb °F.....................................................0.103 J/kg °C .........................................................431 Curie Temperature, °F .........................................................-193 °C ........................................................-125 Permeability at 200 oersted (15.9 kA/m).........................1.0035 Coefficient of Expansion, 10-6in/in °F (µm/m °C) 70-200°F (21-93°C) ..............................7.0 (12.6) Thermal Conductivity, Btu in/ft2 h °F......................................83 W/m °C........................................................12.0 Electrical Resistivity, ohm•circ•mil/ft ...................................731 µΩ ohm•m..........................................1.22 Young’s Modulus, 103 ksi .......................................................31 GPa................................................................214 Modulus of Rigidity, 103 ksi....................................................11GPa..................................................................76
Inconel718,UNS N07718,Alloy718供应商
Inconel718,N07718,Alloy718物理性能:
密度: 8.24g/cm3 熔点: 1260-1320℃
弹性模量: 204.9kN/mm2 热导率:14.7λ/(W(m•℃)
硬度:HBS346-450 热膨胀系数( 21 - 93°C): 13.0 μ m/m °C
Inconel 718合金的主要化学成分如下:C≤0.08 Si≤0.35 Mn≤0.35 S≤0.015 P≤0.015 Cr=17.0~21.0 Ni=50.0~55.0 Fe=余量 Al=0.20~0.80 Nb=4.75~5.50 Ti=0.7~1.25 Cu≤0.30 Mo=2.8~3.3 Co≤1.0
品种规格有:锻件、棒材、板材、带材、环件、丝材、螺栓、弹簧等协商供应,可根据客户要求生产。
欢迎新老客户来电洽谈咨询,
联系方式:
联系人:罗经理
手机: 13671561267
电话: 021-54461707/021-54192998-618
传真: 021-54192997
QQ: 279851675
邮箱: 279851675@qq.com
上海宝缘钢铁有限公司生产供应GH4169 (Inconel718),无缝钢管、圆钢、管件、锻件、法兰、焊丝、配件等,并可定做各种非标材料。
Inconel718合金 在650℃以下具有屈服强度高、塑性好的特点及良好的焊接和成型性能、较高的耐腐蚀、抗氧化和耐辐照性能,合金在-253℃~700℃的温度范围内组织性能稳定 。
Inconel 718
Inconel 718 的化学成分
合金 % 镍 铬 铁 钼 铌 钴 碳 锰 硅 硫 铜 铝 钛
718 最小 50 17 余量 2.8 4.75 0.2 0.7
55 21 3.3 5.5 1 0.08 0.35 0.35 0.01 0.3 0.8 1.15
Inconel 718 的物理性能
密度 8.2 g/cm3 熔点 1260-1340 ℃
Inconel 718 在常温下合金的机械性能的最小值
合金 抗拉强度 Rm N/mm2 屈服强度 RP0.2N/mm2 延伸率 A5 % 布氏硬度 HB
固溶处理 965 550 30 ≤363
718合金具有以下特性:
1.易加工性
2.在700℃时具有高的抗拉强度、疲劳强度、抗蠕变强度和断裂强度
3.在1000℃时具有高抗氧化性
4.在低温下具有稳定的化学性能
5.良好的焊接性能
Inconel 718 的金相结构
718合金为奥氏体结构,沉淀硬化后生成的γ”相使之具有了***的机械性能。在热处理过程中于晶界处生成的δ相使之具有了的塑性。
Inconel 718 的耐腐蚀性
不管在高温还是低温环境,718合金都具有极好的耐应力腐蚀开裂和点蚀的能力。718合金在高温下的抗氧化性尤其出色。
Inconel 718 应用范围应用领域有:
由于在700℃时具有高温强度和***的耐腐蚀性能、易加工性,718可广泛应用于各种高要求的场合。
1.汽轮机
2.液体燃料火箭
3.低温工程
4.酸性环境
5.核工程
Inconel718,UNS N07718,Alloy718供应商
Inconel718,N07718,Alloy718物理性能:
密度: 8.24g/cm3 熔点: 1260-1320℃
弹性模量: 204.9kN/mm2 热导率:14.7λ/(W(m•℃)
硬度:HBS346-450 热膨胀系数( 21 - 93°C): 13.0 μ m/m °C
Inconel 718合金的主要化学成分如下:C≤0.08 Si≤0.35 Mn≤0.35 S≤0.015 P≤0.015 Cr=17.0~21.0 Ni=50.0~55.0 Fe=余量 Al=0.20~0.80 Nb=4.75~5.50 Ti=0.7~1.25 Cu≤0.30 Mo=2.8~3.3 Co≤1.0
品种规格有:锻件、棒材、板材、带材、环件、丝材、螺栓、弹簧等协商供应,可根据客户要求生产。
欢迎新老客户来电洽谈咨询,