德国巴斯夫PA66黑色颗粒A3EG3加纤15%
德国巴斯夫PA66黑色颗粒A3EG3加纤15%
供应PA66 德国巴斯夫Ultramid A3EG3 玻纤15% 高刚性,尺寸稳定
供应PA66 德国巴斯夫Ultramid A3EG6 玻纤30% 高刚性,尺寸稳定
供应PA66 德国巴斯夫Ultramid A3EG5 玻纤25% 高刚性,尺寸稳定
供应PA66 德国巴斯夫Ultramid A3EG7 玻纤35% 高刚性,尺寸稳定
供应PA66 德国巴斯夫Ultramid A3EG10 玻纤50% 高刚性,尺寸稳定
供应PA66 德国巴斯夫Ultramid A3WG6 玻纤30% 高刚性,高强度热稳定
供应PA66 德国巴斯夫Ultramid A3WG7 玻纤35% 高刚性,高强度,热稳定
供应PA66 德国巴斯夫Ultramid A3ZG6 玻纤30% 高刚性. .
汽车外装件
(1)汽车挡泥板、后视镜和油箱盖:陈永东等 开发了高耐热PA/ABS共混材料。共混材料由PA,ABS,抗氧剂、接枝增容剂和无机填料组成,具有***的耐热性、耐化学药品性和力学性能,并且线性热胀系数较低、流动性好,可以进行“在线”喷涂,能用于汽车挡泥板、后视镜和油箱盖等零部件的制作。
PA66抗热氧化技术在聚合工艺中的应用pa66加纤防火:
原料配方中添加抗氧剂:聚合物抗氧剂是一类能抑制或延缓聚合物制造、加工和应用过程中的氧化降解而使用的添加剂。聚合物抗氧剂[-嗽其化学结构和添加种类可分为受阻酚类、胺类、含硫化合物、含磷化合物、有机金属盐类、复合型抗氧剂等等。自动氧化理论认为,聚合物的氧化过程是一种自动催化链反应,不同类型的抗氧剂在抗氧化过程中发挥不同的作用。由于PA66的熔点较高,一般试剂的汽化温度、分解温度或燃点相对较低,因此,适用于PA66的抗氧化剂不多,其中有一部分抗氧剂需要在树脂加工过程中添加。适用于PA类聚合物的主要抗热氧化试剂见表1。
尼龙中国一级代理商供应:PA66德国巴斯夫A3WG6-BK
尼龙中国一级代理商供应:PA66德国巴斯夫A3WG7 BK 00564
尼龙中国一级代理商供应:PA66德国巴斯夫A3WG7-BK
尼龙中国一级代理商供应:PA66德国巴斯夫BN50G6HS BK
尼龙中国一级代理商供应:PA66德国巴斯夫TKR4155G7
尼龙中国一级代理商供应:PA66德国巴斯夫4355G7 BK
尼龙中国一级代理商供应:PA66德国巴斯夫A3EG4 BK
Study on the preparation and Mechanical Properties of PA66 special compound for automobile reinforced and toughened by fire-resistant LGF fiber in Huayun Plastics Company: The extruder adopts automatic control temperature instrument to regulate and control the temperature of the cylinder, the flange interface of the feeding material, the molten immersion tank room and the die of the extrusion molding die. LFT. PA66 particles were prepared by melt-pultrusion process from the surface-treated dry continuous long glass fiber and modified PA66 in a pilot-scale production line. The temperature of the barrel is 255 °C, 243 °C and 258 °c, the temperature of the flange interface is 265 ~ 277 °C, the temperature of the immersion tank is 270 ~ 280 °C, and the temperature of the die is 250 ~ 260 °C. Traction speed l 5 ~ 26m / Min, screw speed 120 ~ 250R / Min.
The content of long glass fiber in PA66 and the effect of melt impregnation can be adjusted and controlled by controlling such factors as drawing speed, screw speed, melt pressure and melt impregnation temperature, the glass fiber is fully oriented, dispersed, melted impregnated and coated, and the glass fiber burrs are not pulled out after pelleting, and the above-mentioned granulated materials are injected into standard samples. The production process is shown in figure 1.