长玻纤增强PA66美国GE/RF-700-12NAT
长玻纤增强PA66美国GE/RF-700-12NAT
PA66 RF004 沙伯基础(原GE) 20%玻纤增强 汽车部件 高韧性
PA66 RF0057E 沙伯基础(原GE) 无卤阻燃 耐磨 增强级
PA66 RF-7007 沙伯基础(原GE) 耐磨 耐寒 抗化学性
PA66 RFL36 沙伯基础(原GE) 含铁氟龙 耐磨 抗冲
PA66 RFL-36XXY BK1A843 沙伯基础(原GE) 玻纤增强 黑色
PA66 RFL-4036 沙伯基础(原GE) 加纤加铁氟龙 耐磨 耐高温 增强
PA66 RFL-4536 沙伯基础(原GE) 加30%玻纤 加15%PTFE
PA66 RL-4540 沙伯基础(原GE) 美国液氮 耐磨 增强级
医疗器械仪器
用于医用输血管、取血器、输液器等。PA单丝可做外科手术缝线、假发等;另外,电子打字机的数字旋转盘、接线柱、传动齿轮、印刷机的带式过滤片等
其它方面
用于制作一次性打火机体、碱性干电池衬垫,摩托车驾驶员的头盔,办公机器外壳,办公用椅的角轮、座和靠背,冰鞋、钓鱼线等,PA薄膜气体阻隔性能优良,而且耐油性、耐低温冲击性、耐穿透性好,可用于肉、火腿肠等冷冻食品的包装。聚酰胺还可棒材和板材,也作齿轮或其它传动装置
汽车制造方面
用于制造燃料滤网、燃料过滤器、罐、捕集器、储油槽、发动机汽缸盖罩、散热器水缸、平衡旋转轴齿轮。也可用在汽车的电器配件、接线柱等。另外,它还可用作驱动、控制部件等。
电器电子工业
可用于制造电饭锅、电动吸尘器、高频电子食品加热器,电器产品的接线柱、开关和电阻器等。
PA66 RP004 沙伯基础(原GE) 耐腐蚀耐气候性好
PA66 RC1003 沙伯基础(原GE) 热稳定性 15%碳纤增强
PA66 RA-1004 沙伯基础(原GE) 20%短玻纤 耐磨 耐高温
PA66 RAL-4022 沙伯基础(原GE) 纤维10% 加PTFE10%
Huayun Plastic Company, raw material technology: 1. DRYING: If the material is sealed before processing, there is no need to dry. However, if the storage container is opened, drying at 85 °C in hot air is recommended. If the humidity is greater than 0.2% , vacuum drying at 105 °C for 12 hours is also required. 2. MELTING TEMPERATURE: 260 ~ 290 °C. The product of glass additive is 275ー280 °C. The melting temperature should be avoided above 300 °C. Mold temperature: recommended 80 °C. Mold temperature will affect the degree of crystallinity, which will affect the physical properties of the product. For thin-walled plastic parts, if the mold temperature is lower than 40 °c, the crystallinity of the plastic parts will change with time. In order to maintain the geometric stability of the plastic parts, annealing treatment is needed. 3. INJECTION PRESSURE: usually between 750 and 1250 BAR, depending on material and product design. 4. INJECTION RATE: High (slightly lower for reinforced materials). Runner and gate: Due to the short setting time of PA66,