- 商品
- 详情
加玻纤25% PA66 A3G5 德国巴斯夫 高强度 耐高温
- ¥24.00 ≥1千克起批
参数
- 否是否进口
- 德国巴斯夫厂家(产地)
- A3G5 牌号
广东 东莞
1天内发货
50000千克
产品详情
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.32 g/cc | 0.0477 lb/in³ | *** 1183 |
| Moisture Absorption at Equilibrium | 1.7 - 2.1 % | 1.7 - 2.1 % | 23°C; 50% RH; *** 62 |
| Water Absorption at Saturation | 5.7 - 6.3 % | 5.7 - 6.3 % | *** 62 |
| Viscosity Measurement | 145 | 145 | *** 307 |
| Linear Mold Shrinkage | 0.0055 cm/cm | 0.0055 in/in | restricted |
| Melt Flow | 66 g/10 min @Load 5.00 kg, Temperature 275 °C | 66 g/10 min @Load 11.0 lb, Temperature 527 °F | *** 1133 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Yield | 120 MPa | 17400 psi | 50 mm/min; *** 527-1/-2 |
| Elongation at Yield | 3.0 % | 3.0 % | 50 mm/min; *** 527-1/-2 |
| Modulus of Elasticity | 8.60 GPa | 1250 ksi | *** 527-1/-2 |
| Flexural Strength | 260 MPa | 37700 psi | at max force; *** 178 |
| Flexural Modulus | 7.60 GPa | 1100 ksi | *** 178 |
| Izod Impact, Notched (***) | 9.50 kJ/m² @Temperature 23.0 °C | 4.52 ft-lb/in² @Temperature 73.4 °F | *** 180/A |
| Charpy Impact Unnotched | 5.50 J/cm² @Temperature -30.0 °C | 26.2 ft-lb/in² @Temperature -22.0 °F | *** 179/1eU |
| 6.50 J/cm² @Temperature 23.0 °C | 30.9 ft-lb/in² @Temperature 73.4 °F | *** 179/1eU | |
| Charpy Impact, Notched | 0.900 J/cm² @Temperature -30.0 °C | 4.28 ft-lb/in² @Temperature -22.0 °F | *** 179/1eA |
| 1.20 J/cm² @Temperature 23.0 °C | 5.71 ft-lb/in² @Temperature 73.4 °F | *** 179/1eA | |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 1.00e+13 ohm-cm | 1.00e+13 ohm-cm | IEC 60093 |
| Dielectric Constant | 3.5 @Frequency 1.00e+6 Hz | 3.5 @Frequency 1.00e+6 Hz | IEC 60250 |
| Dissipation Factor | 0.014 @Frequency 1.00e+6 Hz | 0.014 @Frequency 1.00e+6 Hz | IEC 60250 |
| Comparative Tracking Index | 550 V | 550 V | Test solution A; IEC 60112 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear, Parallel to Flow | 25.0 - 35.0 µm/m-°C @Temperature 23.0 - 80.0 °C | 13.9 - 19.4 µin/in-°F @Temperature 73.4 - 176 °F | DIN 11359-1/-2 |
| CTE, linear, Transverse to Flow | 60.0 - 70.0 µm/m-°C @Temperature 23.0 - 80.0 °C | 33.3 - 38.9 µin/in-°F @Temperature 73.4 - 176 °F | DIN 11359-1/-2 |
| Thermal Conductivity | 0.340 W/m-K | 2.36 BTU-in/hr-ft²-°F | DIN 52612 |
| Melting Point | 260 °C | 500 °F | DIN 53765 |
| Maximum Service Temperature, Air | 135 °C | 275 °F | for 50% loss of tensile strength after 20000hr |
| 165 °C | 329 °F | for 50% loss of tensile strength after 5000hr | |
| 240 °C | 464 °F | ||
| Deflection Temperature at 0.46 MPa (66 psi) | 250 °C | 482 °F | *** 75-1/-2 |
| Deflection Temperature at 1.8 MPa (264 psi) | 245 °C | 473 °F | *** 75-1/-2 |
| Flammability, UL94 | HB @Thickness 1.60 mm | HB @Thickness 0.0630 in |
本公司长期销售德国巴斯夫 PA66 PA6 POM TPU PES PSU PPSU料多种牌号
我司产品均可提供详细物性表(英文和中文版)相关资料；可开13%增值税发票；免费为客户分析样版并提供原料型号咨询服务(可免费帮客户翻译英文资料)；如需试料、了解产品相关信息及当日报价，敬请来电、竭诚为您服务！
联系电话：18688629368
为您推荐
在线问
产品参数
- 否
- 德国巴斯夫
- A3G5
- 品牌经销
- 标准料
