取消

lexan lexan代理 lexan板 lexan折弯 lexanpc片 lexan943a lexan pc lexan pc板 lexan141 lexan500r

商品
详情

PPC LEXAN™ CFR7431 沙伯基础非溴化阻燃

¥22.00 ≥1千克起批

参数

否是否进口
美国产地
沙伯基础(原GE)厂家(产地)

发货地广东东莞 1天内发货供货总量30000千克

东莞市樟木头双浩塑胶原料经营部: 进入店铺在线咨询

PPC LEXAN™ CFR7630 沙伯基础非溴化阻燃 ¥22.00

PCC LEXAN™ CFR9111 沙伯基础非溴化阻燃高流动性 ¥18.00

PPC LEXAN™ CFR9131 沙伯基础非溴化阻燃 ¥19.00

PPC LEXAN™ CFR9712 沙伯基础非溴化阻燃高流动性 ¥22.00

PCC LEXAN™ CXT17 沙伯基础耐温高 ¥37.00

PPC LEXAN™ CXT17EX 沙伯基础耐温高 ¥38.00

产品详情

Physical Properties	Metric	English	Comments

Specific Gravity	1.19 g/cc	1.19 g/cc	ASTM D792
Density	1.20 g/cc	0.0434 lb/in³	*** 1183
Moisture Absorption	0.0200 %	0.0200 %	Injection Molding
	0.100 %	0.100 %	23°C / 50% RH; *** 62
Water Absorption at Saturation	0.13 %	0.13 %	*** 62-1
Viscosity	9.0 cP @Load 1.20 kg, Temperature 300 °C	9.0 cP @Load 2.65 lb, Temperature 572 °F	MVR cc/10 min; *** 1133
Linear Mold Shrinkage, Flow	0.0055 - 0.0075 cm/cm @Thickness 3.20 mm	0.0055 - 0.0075 in/in @Thickness 0.126 in	SABIC method
Linear Mold Shrinkage, Transverse	0.0060 - 0.0080 cm/cm @Thickness 3.20 mm	0.0060 - 0.0080 in/in @Thickness 0.126 in	SABIC method
Melt Flow	10 g/10 min @Load 1.20 kg, Temperature 300 °C	10 g/10 min @Load 2.65 lb, Temperature 572 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	53.0 MPa	7690 psi	50 mm/min; *** 527
	55.0 MPa	7980 psi	50 mm/min; ASTM D638
Tensile Strength, Yield	66.0 MPa	9570 psi	50 mm/min; *** 527
	67.0 MPa	9720 psi	50 mm/min; ASTM D638
Elongation at Break	55 %	55 %	50 mm/min; ASTM D638
	56 %	56 %	50 mm/min; *** 527
Elongation at Yield	6.0 %	6.0 %	50 mm/min; ASTM D638
	6.0 %	6.0 %	50 mm/min; *** 527
Tensile Modulus	2.35 GPa	341 ksi	1 mm/min; *** 527
	2.52 GPa	365 ksi	50 mm/min; ASTM D638
Flexural Strength	101 MPa	14600 psi	yield, 2 mm/min; *** 178
	107 MPa	15500 psi	yld, 1.3 mm/min, 50 mm span; ASTM D790
Flexural Modulus	2.45 GPa	355 ksi	1.3 mm/min, 50 mm span; ASTM D790
	2.45 GPa	355 ksi	2 mm/min; *** 178
Izod Impact Notched	100 J	73.8 ft-lb	ASTM D256
	81.0 J @Temperature -30.0 °C	59.7 ft-lb @Temperature -22.0 °F	ASTM D256
Izod Impact, Unnotched	NB	NB	ASTM D4812
	NB @Temperature -30.0 °C	NB @Temperature -22.0 °F	ASTM D4812
Izod Impact, Notched (***)	9.00 kJ/m²	4.28 ft-lb/in²	80103; *** 180/1A
	8.00 kJ/m² @Temperature -30.0 °C	3.81 ft-lb/in² @Temperature -22.0 °F	80103; *** 180/1A
Izod Impact, Unnotched (***)	NB	NB	80103; *** 180/1U
	NB @Temperature -30.0 °C	NB @Temperature -22.0 °F	80103; *** 180/1U
Charpy Impact Unnotched	NB	NB	Edgew 80103 sp=62mm; *** 179/1eU
	NB @Temperature -30.0 °C	NB @Temperature -22.0 °F	Edgew 80103 sp=62mm; *** 179/1eU
Charpy Impact, Notched	1.00 J/cm²	4.76 ft-lb/in²	Edgew 80103 sp=62mm; *** 179/1eA
	0.700 J/cm² @Temperature -30.0 °C	3.33 ft-lb/in² @Temperature -22.0 °F	Edgew 80103 sp=62mm; *** 179/1eA
Dart Drop, Total Energy	64.0 J	47.2 ft-lb	ASTM D3763

Electrical Properties	Metric	English	Comments
Dielectric Constant	2.79 @Frequency 1.10e+9 Hz	2.79 @Frequency 1.10e+9 Hz	ASTM ES 7-83
Dissipation Factor	0.0057 @Frequency 1.10e+9 Hz	0.0057 @Frequency 1.10e+9 Hz	ASTM ES 7-83
Comparative Tracking Index	175 - 250 V	175 - 250 V	UL 746A
Hot Wire Ignition, HWI	15 - 30 sec @Thickness >=1.20 mm	15 - 30 sec @Thickness >=0.0472 in	UL 746A
	>= 120 sec @Thickness >=3.00 mm	>= 120 sec @Thickness >=0.118 in	UL 746A
High Amp Arc Ignition, HAI	>= 120 arcs @Thickness >=1.20 mm	>= 120 arcs @Thickness >=0.0472 in	UL 746A

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	67.0 µm/m-°C @Temperature -40.0 - 40.0 °C	37.2 µin/in-°F @Temperature -40.0 - 104 °F	ASTM E831
	77.0 µm/m-°C @Temperature 23.0 - 80.0 °C	42.8 µin/in-°F @Temperature 73.4 - 176 °F	*** 11359-2
CTE, linear, Transverse to Flow	67.0 µm/m-°C @Temperature -40.0 - 40.0 °C	37.2 µin/in-°F @Temperature -40.0 - 104 °F	ASTM E831
	79.0 µm/m-°C @Temperature 23.0 - 80.0 °C	43.9 µin/in-°F @Temperature 73.4 - 176 °F	*** 11359-2
Hot Ball Pressure Test	125 °C	257 °F	PASS; IEC 60695-10-2
Deflection Temperature at 0.46 MPa (66 psi)	131 °C	268 °F	Edgew 120104 sp=100mm; *** 75/Be
	131 °C @Thickness 3.20 mm	268 °F @Thickness 0.126 in	unannealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	120 °C	248 °F	Edgew 120104 sp=100mm; *** 75/Ae
	120 °C @Thickness 3.20 mm	248 °F @Thickness 0.126 in	unannealed; ASTM D648
Vicat Softening Point	136 °C	277 °F	Rate B/50; ASTM D1525
	137 °C	279 °F	Rate B/50; *** 306
	139 °C	282 °F	Rate B/120; *** 306
UL RTI, Electrical	125 °C	257 °F	UL 746B
UL RTI, Mechanical with Impact	120 °C	248 °F	UL 746B
UL RTI, Mechanical without Impact	125 °C	257 °F	UL 746B
Flammability, UL94	V-2 @Thickness >=0.400 mm	V-2 @Thickness >=0.0157 in	UL 94
	V-1 @Thickness >=1.00 mm	V-1 @Thickness >=0.0394 in	UL 94
	V-0 @Thickness >=1.20 mm	V-0 @Thickness >=0.0472 in	UL 94
	5VA @Thickness >=3.00 mm	5VA @Thickness >=0.118 in	UL 94
Glow Wire Ignition Temperature	850 °C @Thickness 1.20 mm	1560 °F @Thickness 0.0472 in	IEC 60695-2-13
	850 °C @Thickness 3.00 mm	1560 °F @Thickness 0.118 in	IEC 60695-2-13
Glow Wire Flammability Index	960 °C @Thickness 1.20 mm	1760 °F @Thickness 0.0472 in	IEC 60695-2-12
	960 °C @Thickness 3.00 mm	1760 °F @Thickness 0.118 in	IEC 60695-2-12

Optical Properties	Metric	English	Comments
Transmission, Visible	>= 88 % @Thickness 3.00 mm	>= 88 % @Thickness 0.118 in	SABIC method
	>= 89 % @Thickness 2.00 mm	>= 89 % @Thickness 0.0787 in	SABIC method
	>= 90 % @Thickness 1.00 mm	>= 90 % @Thickness 0.0394 in	SABIC method

Processing Properties	Metric	English	Comments
Nozzle Temperature	275 - 300 °C	527 - 572 °F
Zone 2	270 - 295 °C	518 - 563 °F
Zone 3	280 - 305 °C	536 - 581 °F
Melt Temperature	280 - 305 °C	536 - 581 °F	Injection Molding
Mold Temperature	70.0 - 95.0 °C	158 - 203 °F
Drying Temperature	120 °C	248 °F	Injection Molding
Dry Time	3.00 - 4.00 hour	3.00 - 4.00 hour	Injection Molding
	48.0 hour	48.0 hour	Cumulative; Injection Molding
Back Pressure	0.300 - 0.700 MPa	43.5 - 102 psi
Shot Size	40 - 60 %	40 - 60 %
Vent Depth	0.00250 - 0.00760 cm	0.000984 - 0.00299 in
Screw Speed	40 - 70 rpm	40 - 70 rpm

Descriptive Properties
UV-light, water exposure/immersion	F1	UL 746C

本公司长期销售沙伯基础 PC，ABS，ASA，EVA，PA6，PBT，PE，PBT，PET，PMMA，POM，PS，PP，PU，PES，PEI料等多种牌号

我司产品均可提供详细物性表(英文和中文版)相关资料；可开13%增值税发票；免费为客户分析样版并提供原料型号咨询服务(可免费帮客户翻译英文资料)；如需试料、了解产品相关信息及当日报价，敬请来电、竭诚为您服务！