取消

lexan lexan代理 lexan板 lexan折弯 lexanpc片 lexan943a lexan pc lexan pc板 lexan141 lexan500r

商品
详情

PPC LEXAN™ HFD4413 沙伯基础玻纤30% 高流动性

¥15.00 ≥1千克起批

参数

否是否进口
美国产地
沙伯基础(原GE)厂家(产地)

发货地广东东莞 1天内发货供货总量30000千克

东莞市樟木头双浩塑胶原料经营部 2年: 进入店铺在线咨询

PPC LEXAN™ HFD4471 沙伯基础玻纤10% 中等流动性高抗冲击性 ¥15.00

PPC LEXAN™ HFD4472 沙伯基础玻纤20% 中等流动性高抗冲击性 ¥15.00

PPC LEXAN™ HPH4404 沙伯基础电子束消毒耐温高 ¥36.00

PPC LEXAN™ HPH4504 沙伯基础耐温高 ¥36.00

PPC LEXAN™ FXD9810 沙伯基础非溴化阻燃高抗冲击性 ¥22.00

PPC LEXAN™ HPH4504H 沙伯基础辐射消毒耐温高 ¥36.00

产品详情

Physical Properties	Metric	English	Comments

Specific Gravity	1.43 g/cc	1.43 g/cc	ASTM D792
Density	1.44 g/cc	0.0520 lb/in³	ISO 1183
Moisture Absorption	0.0200 %	0.0200 %	Injection Molding
	0.120 %	0.120 %	23°C / 50% RH; ISO 62
Water Absorption at Saturation	0.30 %	0.30 %	ISO 62-1
Viscosity	18 cP @Load 1.20 kg, Temperature 300 °C	18 cP @Load 2.65 lb, Temperature 572 °F	MVR cc/10 min; ISO 1133
Linear Mold Shrinkage, Flow	0.0010 - 0.0030 cm/cm @Thickness 3.20 mm	0.0010 - 0.0030 in/in @Thickness 0.126 in	SABIC method
Linear Mold Shrinkage, Transverse	0.0010 - 0.0030 cm/cm @Thickness 3.20 mm	0.0010 - 0.0030 in/in @Thickness 0.126 in	SABIC method
Melt Flow	16 g/10 min @Load 1.20 kg, Temperature 300 °C	16 g/10 min @Load 2.65 lb, Temperature 572 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	111 MPa	16100 psi	5 mm/min; ASTM D638
	125 MPa	18100 psi	5 mm/min; ISO 527
Tensile Strength, Yield	111 MPa	16100 psi	5 mm/min; ASTM D638
	115 MPa	16700 psi	5 mm/min; ISO 527
Elongation at Break	2.1 %	2.1 %	5 mm/min; ISO 527
Elongation at Yield	2.5 %	2.5 %	5 mm/min; ISO 527
	3.0 %	3.0 %	5 mm/min; ASTM D638
Tensile Modulus	7.87 GPa	1140 ksi	5 mm/min; ASTM D638
Flexural Strength	182 MPa	26400 psi	yld, 1.3 mm/min, 50 mm span; ASTM D790
Flexural Modulus	7.76 GPa	1130 ksi	1.3 mm/min, 50 mm span; ASTM D790
Izod Impact Notched	133 J	98.1 ft-lb	ASTM D256
Izod Impact, Unnotched	8.52 J/cm	16.0 ft-lb/in	ASTM D4812
Izod Impact, Notched (ISO)	10.0 kJ/m²	4.76 ft-lb/in²	80103; ISO 180/1A
	10.0 kJ/m² @Temperature -30.0 °C	4.76 ft-lb/in² @Temperature -22.0 °F	80103; ISO 180/1A
Izod Impact, Unnotched (ISO)	37.0 kJ/m²	17.6 ft-lb/in²	80103; ISO 180/1U
	30.0 kJ/m² @Temperature -30.0 °C	14.3 ft-lb/in² @Temperature -22.0 °F	80103; ISO 180/1U
Charpy Impact Unnotched	4.00 J/cm²	19.0 ft-lb/in²	Edgew 80103 sp=62mm; ISO 179/1eU
	4.90 J/cm² @Temperature -30.0 °C	23.3 ft-lb/in² @Temperature -22.0 °F	Edgew 80103 sp=62mm; ISO 179/1eU
Charpy Impact, Notched	1.20 J/cm²	5.71 ft-lb/in²	Edgew 80103 sp=62mm; ISO 179/1eA
	1.10 J/cm² @Temperature -30.0 °C	5.23 ft-lb/in² @Temperature -22.0 °F	Edgew 80103 sp=62mm; ISO 179/1eA
Dart Drop, Total Energy	17.0 J	12.5 ft-lb	ASTM D3763

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	30.0 µm/m-°C @Temperature -40.0 - 40.0 °C	16.7 µin/in-°F @Temperature -40.0 - 104 °F	ASTM E831
	30.0 µm/m-°C @Temperature 23.0 - 80.0 °C	16.7 µin/in-°F @Temperature 73.4 - 176 °F	ISO 11359-2
CTE, linear, Transverse to Flow	70.0 µm/m-°C @Temperature -40.0 - 40.0 °C	38.9 µin/in-°F @Temperature -40.0 - 104 °F	ASTM E831
	70.0 µm/m-°C @Temperature 23.0 - 80.0 °C	38.9 µin/in-°F @Temperature 73.4 - 176 °F	ISO 11359-2
Hot Ball Pressure Test	125 °C	257 °F	PASS; IEC 60695-10-2
Deflection Temperature at 0.46 MPa (66 psi)	130 °C @Thickness 3.20 mm	266 °F @Thickness 0.126 in	unannealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	129 °C	264 °F	Flatw 80104 sp=64mm; ISO 75/Af
	125 °C @Thickness 3.20 mm	257 °F @Thickness 0.126 in	unannealed; ASTM D648
Vicat Softening Point	143 °C	289 °F	Rate B/120; ISO 306
UL RTI, Electrical	80.0 °C	176 °F	UL 746B
UL RTI, Mechanical with Impact	80.0 °C	176 °F	UL 746B
UL RTI, Mechanical without Impact	80.0 °C	176 °F	UL 746B
Flammability, UL94	HB @Thickness >=0.300 mm	HB @Thickness >=0.0118 in	UL 94
Glow Wire Ignition Temperature	850 °C @Thickness 1.00 mm	1560 °F @Thickness 0.0394 in	IEC 60695-2-13
	850 °C @Thickness 3.00 mm	1560 °F @Thickness 0.118 in	IEC 60695-2-13
	875 °C @Thickness 2.00 mm	1610 °F @Thickness 0.0787 in	IEC 60695-2-13
Glow Wire Flammability Index	900 °C @Thickness 1.00 mm	1650 °F @Thickness 0.0394 in	IEC 60695-2-12
	960 °C @Thickness 2.00 mm	1760 °F @Thickness 0.0787 in	IEC 60695-2-12
	960 °C @Thickness 3.00 mm	1760 °F @Thickness 0.118 in	IEC 60695-2-12

Processing Properties	Metric	English	Comments
Nozzle Temperature	280 - 305 °C	536 - 581 °F
Zone 2	275 - 300 °C	527 - 572 °F
Zone 3	290 - 310 °C	554 - 590 °F
Melt Temperature	290 - 310 °C	554 - 590 °F	Injection Molding
Mold Temperature	70.0 - 95.0 °C	158 - 203 °F
Drying Temperature	120 °C	248 °F	Injection Molding
Dry Time	3.00 - 4.00 hour	3.00 - 4.00 hour	Injection Molding
	48.0 hour	48.0 hour	Cumulative; Injection Molding
Back Pressure	0.300 - 0.700 MPa	43.5 - 102 psi
Shot Size	40 - 60 %	40 - 60 %
Vent Depth	0.00250 - 0.00760 cm	0.000984 - 0.00299 in
Screw Speed	40 - 70 rpm	40 - 70 rpm

本公司长期销售沙伯基础 PC，ABS，ASA，EVA，PA6，PBT，PE，PBT，PET，PMMA，POM，PS，PP，PU，PES，PEI料等多种牌号

我司产品均可提供详细物性表(英文和中文版)相关资料；可开13%增值税发票；免费为客户分析样版并提供原料型号咨询服务(可免费帮客户翻译英文资料)；如需试料、了解产品相关信息及当日报价，敬请来电、竭诚为您服务！