T85耐冲击合金塑料

¥18.00 ≥25千克起批

参数

耐冲击产品特性
否是否进口
德国拜耳产地

发货地广东东莞 1天内发货供货总量44000千克

东莞市华韵塑胶原料有限公司 8年: 进入店铺在线咨询

PC/ABS合金料德国拜耳FR110/FR110阻燃级 ¥22.00

PA66|美国杜邦|408L|408L|408L超高抗冲击 ¥28.00

PA66 ST801美国杜邦|ST801超韧耐冲击 ¥28.00

超韧耐寒抗冲PA66|美国杜邦|ST801HS ST801HS ¥28.00

热稳定性PA66 70G13L美国杜邦加纤13%尼龙料 ¥28.00

深圳Y1500众和茂名石化PP口罩专用Y1500熔喷布价格 ¥33.00

产品详情

德国拜耳PC/ABS T85/T85/T85耐冲击合金塑料

pc/abs多种牌号：1.拥有通用级与abs类似的流动性、电镀性级别，超耐候级别汽车部件所要求的高耐热级别、耐老化级别等，种类繁多。2.阻燃级：添加了高功能阻燃剂，拥有符合v-0、v-1、v-2及5v标准不同的阻燃牌号，既有高耐热牌号，又有不使用三氧化锑的热稳定性极为优良的特殊牌号。所有阻燃级别都取得了ul认证。3.磷系阻燃级：既有非卤素的pc/abs通用牌号又有高耐热牌号，为高环保级别。4.填料增强级：既有玻璃纤维和矿物填料所增强的通用级和阻燃级，也有适用于精密仪表的特殊级。

PC/ABS 泰国拜耳T-85/Bayblend*T85 高流动性/电气外壳

PC/ABS 泰国拜耳T-85XF/Bayblend*T85XF 高流动性/电气外壳

PC/ABS 泰国拜耳FR3110TV/Bayblend*FR3110TV/阻燃/高耐热/无溴/无锑/

PC/ABS 泰国拜耳FR110/Bayblend*FR110/防火性能

PC/ABS 泰国拜耳FR2000/Bayblend*FR2000/防火性能

PC/ABS 泰国拜耳FR2010/Bayblend*FR2010/阻燃性能

PC/ABS 泰国拜耳FR3000/Bayblend*FR3000/抗紫外线/无溴防火/良好流动性/无锑

PC/ABS 泰国拜耳FR-3000 HI/Bayblend*FR-3000 HI 高抗应力裂纹/耐化学性

PC/ABS 泰国拜耳FR3002/Bayblend*FR3002/防火无溴/无锑/薄壁部件

PC/ABS 泰国拜耳FR3005HF/Bayblend*FR3005HF/高流动性/防火*无溴/无锑

PC/ABS 泰国拜耳FR3005/Bayblend*FR3005/耐化学性/防火/无锑/无溴

PC/ABS 泰国拜耳FR3006/Bayblend*FR3006/良好流动性/高耐热性/无溴/无锑

PC/ABS 泰国拜耳FR3010/Bayblend*FR3010/耐化学/高抗应力裂纹/高耐热性/防火/无溴

　　pc/abs耐候性保持了pc的耐候性优点，因光照而引起的物化性能和颜色变化很少。

　　pc/abs的收缩率不受树脂流动方向以及垂直方向影响，尺寸稳定性非常好。

　Huayun Plastics company PC / ABS Alloy is a heterogeneous multiphase system, which combines the excellent properties of ABS and PC, and is a polymer alloy with good properties. On the one hand, it can improve the heat resistance, impact resistance and tensile properties of ABS, and make ABS used in high performance field; on the other hand, it can reduce the cost and melt viscosity of PC, improve its fluidity and improve its processability, the PC can be used to process the products with thin wall and long flow by reducing the stress and impact strength. Compared with ABS, pc / ABS alloy mainly improves the melt fluidity, formability, electroplate ability and appearance, and the heat resistance, impact resistance and rigidity of thin-walled products. But from the general goal of modification, it is most important to obtain good formability, appearance and reduce the cost of PC.

为您推荐