高品质超高分子量聚乙烯托辊耐磨自润滑免维护自产自销
¥48.00
超高分子聚乙烯托辊，阻力小，耐磨
¥60.00
超高聚乙烯托辊，模具开发
¥25.00
超高分子量聚乙烯托辊实力厂家供应
¥25.00
鑫文浩皮带脱水机托辊 超高分子聚乙烯托辊 铂金托辊 胶带托辊
¥220.00
2018超高聚乙烯托辊 塑料托辊***格 2018超高聚乙烯托辊 塑料托辊***格 2018超高聚乙烯托辊 塑料托辊***格 2018超高聚乙烯托辊 塑料托辊***格 2018超高聚乙烯托辊 塑料托辊***格 2018超高聚乙烯托辊 塑料托辊***格 大大延长皮带的寿命，由于UHMW-PE托辊具有表面不粘结性，不生锈，自润滑性，因此对皮带有更好的保护性。另一方面也不会产生“咬伤”皮带的现象，即使在托辊万一不转动时，也不会损伤皮带。事实上，超高分子量聚乙烯一直被用作皮带、链条等的保护衬材。
运行成本低，有***的经济效益。UHMW-PE托辊重量轻（一般仅为同规格钢托辊重量的1/3～1/2），安装更换很方便，减轻了劳动强度和维护量，并且可节省电耗。
很好地降低了运行噪音，超高分子量聚乙烯有很好的冲击能吸收性和阻尼性，能很好的地去除噪音和振动，从而保护轴承免受冲击损坏而大大延长托辊的整体使用寿命。
良好的承载性能和防腐性能，通过调整筒体壁厚（一般7mm以上），支撑结构以及采用钢塑复合结构等方法，可以使UHMW-PE托辊满足重载运输要求。
The life of the belt is greatly extended. Since the UHMW-PE roller has surface non-adhesion, no Rust, and self-lubrication, it has better protection for the skin. On the other hand, there will be no "bite" belt phenomenon, even if the roller does not rotate, it will not damage the belt. In fact, ultra-high molecular weight polyethylene has been used as a protective lining for belts, chains, etc..
Low operating costs and significant economic benefits. The UHMW-PE roller is light in weight(usually only 1/3 to 1/2 of the weight of the same specification steel roller). The installation and replacement are very convenient, reducing labor intensity and maintenance, and can save electricity consumption.
The operating noise is reduced very well. Ultra-high molecular weight polyethylene has a good shock absorbency and damping property, and can remove noise and vibration very well, thus protecting the bearing from damage to the impact and greatly extending the overall service life of the roller.
Good load-bearing performance and anti-corrosion performance, by adjusting the thickness of the cylinder wall(generally more than 7mm), support structure and the use of steel plastic composite structure and other methods, can make the UHMW-PE roller meet the heavy load transportation requirements.
在线问
