供应PET 美国杜邦FR515工程塑胶原料
¥29000.00
供应PET 美国杜邦FR530-NC工程塑胶原料
¥28500.00
供应PET 台湾新光5015W 瓶瓶用聚酯粒
¥10500.00
供应美国杜邦RE15030 玻纤增强PET工程塑胶原料
¥31500.00
供应PET 日本钟渊8300SE玻纤增强5VA阻燃PET工程塑胶原料
¥26500.00
供应日本东丽ABS 700 高硬度高刚
¥15000.00
供应PET 美国杜邦FR330工程塑胶原料，含30%玻纤增强，0.8mm防火V0，5VA阻燃，良好的电气和机械平衡性，耐高温。
美国杜邦Rynite FR330物性：
| Property | Test Method | Units | Value | |
| Mechanical | ||||
| Tensile Strength | ASTM D 638 | MPa (kpsi) | ||
| -40C (-40F) | 193 (28.0) | |||
| 23C (73F) | 138 (20.0) | |||
| 90C (194F) | 72.4 (10.5) | |||
| 150C (300F) | 44.8 (6.5) | |||
| Elongation at Break | ASTM D 638 | % | ||
| -40C (-40F) | 1.9 | |||
| 23C (73F) | 2.1 | |||
| 90C (194F) | 3.5 | |||
| 150C (300F) | 4.0 | |||
| Tensile Modulus | ASTM D 638 | MPa (kpsi) | ||
| -40C (-40F) | 12500 (1810) | |||
| 23C (73F) | 11000 (1590) | |||
| 90C (194F) | 5580 (809) | |||
| 150C (300F) | 3890 (564) | |||
| Shear Strength | ASTM D 732 | MPa (kpsi) | 60.0 (8.7) | |
| Poisson&＃39;s Ratio | 0.40 | |||
| Flexural Modulus | ASTM D 790 | MPa (kpsi) | ||
| -40C (-40F) | 11000 (1600) | |||
| 23C (73F) | 10300 (1500) | |||
| 90C (194F) | 4650 (674) | |||
| 150C (300F) | 2650 (384) | |||
| Mechanical | ||||
| Flexural Strength | ASTM D 790 | MPa (kpsi) | ||
| -40C (-40F) | 262 (38.0) | |||
| 23C (73F) | 200 (29.0) | |||
| 90C (194F) | 107 (15.5) | |||
| 150C (300F) | 69.0 (10.0) | |||
| Compressive Strength | ASTM D 695 | MPa (kpsi) | 200 (29.0) | |
| Deformation Under Load | ASTM D 621 | % | ||
| 23C (73F), 27.6MPa (4000psi) | 0.3 | |||
| 50C (122F), 27.6MPa (4000psi) | 1.7 | |||
| Flexural Fatigue | ASTM D 671 | MPa (kpsi) | ||
| 23C (73F), Cycles 10E6 | 41.3 (6.0) | |||
| Flexural Creep Strain | ASTM D 2990 | % | ||
| 23C (73F), 27.6MPa (4000psi) | 0.37 | |||
| 60C (140F), 27.6MPa (4000psi) | 0.87 | |||
| 125C (257F), 27.6MPa (4000psi) | 1.59 | |||
| Izod Impact | ASTM D 256 | J/m (ft lb/in) | ||
| -40C (-40F) | 85 (1.6) | |||
| 23C (73F) | 91 (1.7) | |||
| Unnotched Impact | ASTM D 4812 | J/m (ft lb/in) | ||
| -40C (-40F) | 535 (10.0) | |||
| 23C (73F) | 695 (13.0) | |||
| Thermal Heat Deflection Temperature 0.45MPa (66psi) 1.8MPa (264psi) CLTE, Flow -40 to 23C (-40 to 73F) 23 to 55C (73 to 130F) 55 to 160C (163 to 320F) CLTE, Transverse -40 to 23C (-40 to 73F) 23 to 55C (73 to 130F) 55 to 160C (163 to 320F) Melting Point Thermal Conductivity | ASTM D 648 | °C (°F) | ||
| 247 (477) | ||||
| 222 (432) | ||||
| ASTM E 831 | E-4/K (E-4/F) | |||
| 0.21 (0.12) | ||||
| 0.16 (0.09) | ||||
| 0.06 (0.03) | ||||
| ASTM E 831 | E-4/K (E-4/F) | |||
| 0.62 (0.34) | ||||
| 0.76 (0.42) | ||||
| 0.72 (0.40) | ||||
| ASTM D 3418 | °C (°F) | 254 (489) | ||
| ASTM C 177 | W/m K (Btu in/h ft2 F) | 0.25 (1.7) | ||
| Electrical Surface Resistivity Volume Resistivity Dielectric Strength, Short Time 23C (73F), 500V/s, in oil, 1.6mm (0.062in) 23C (73F), 500V/s, in oil, 3.2mm (0.125in) 95C (200F), 500V/s, in oil, 1.6mm (0.062in) 95C (200F), 500V/s, in oil, 3.2mm (0.125in) 150C (300F), 500V/s, in oil, 1.6mm (0.062in) 150C (300F), 500V/s, in oil, 3.2mm (0.125in) | ASTM D 257 | ohm | 1E+13 | |
| ASTM D 257 | ohm cm | 1E+15 | ||
| ASTM D 149 | kV/mm (V/mil) | |||
| 25.0 (635) | ||||
| 18.0 (460) | ||||
| 23.5 (600) | ||||
| 18.0 (460) | ||||
| 13.0 (330) | ||||
| 9.0 (230) | ||||
订购说明
★公司秉承“以诚为本，信誉至上”的经营宗旨，【诚信***】【服务***】【品质***】创立了自己的经营理念，在客户群树立了良好的***。为您提供充足的货源和专业的技术支持！公司所售之新料均***原厂原包，货真价实!
★公司货源充足，品种齐全，价格合理,量大从优,原厂原包,当天订货当天发货。我公司可以提供原料出厂报告(COA)，认证报告;UL认证、FDA认证、材质证明、***，ASTM物性资料、ROHS(SGS)报告、物质安全资料表(MSDS)物性、报价、UL报告、RoSH标准、SGS检测报告等）......
★支持物流，快递和货运; 支持现金，银行转账（广东省内可快递代收）.
★原料到厂后，请不要拆外包装，应先仔细检查原料的外包装是否完好及原料型号是否与您所订购原料型号相匹配。
★货物送达后，请***时间检查，发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存，并在24小时内与东莞佳唯斯塑胶原料有限公司颜小姐联系。
★如发货后未能及时收到，请及时与东莞佳唯斯塑胶原料有限公司颜小姐联系15382847379
在线问
