百航牌助行器综合测试机/助行器疲劳测试机/厂家报价
¥10000.00
百航通用轮椅车疲劳测试机/台式助行器疲劳试验机 价格
¥26000.00
非标定制多功能助行器疲劳试验机 滑板车疲劳测试机-百航牌
¥100.00
新品滑板车疲劳试验机厂家 电动滑板车振动试验机
¥35550.00
供应滑板车行走寿命试验机 滑板车动态耐久性测试机-百航
¥30000.00
助行器倾斜静载疲劳试验机椅子静载荷测试机
一、百航助行器倾斜静载疲劳试验机功能要求： 1、做静载荷测试，该功能基本介绍：比如设置300公斤，保持时间设置10秒钟，测试时气缸自动下压到达300公斤后保持10秒钟，到达设定时间后自动返回，测试完成；通过稳定性那台机，底板可倾斜到一定的角度，做倾斜静载测试； 2、可做反复施压的疲劳测试，用于拐杖等产品的测试，该功能基本介绍：比如设置150公斤，测试次数设置100000次，测试时气缸自动下压到达150公斤的力值后自动返回，力值返回到0后又自动下压到设定的力值，如此反复到达设定的次数后自动停机，测试完成； 1、 Functional requirements of baihang walking aid inclining static load fatigue testing machine: 1. Do static load test, the basic introduction of the function: for example, set 300 kg, hold time set for 10 seconds, when the test, the cylinder automatically press down to 300 kg, hold for 10 seconds, after reaching the set time, automatically return, the test is completed; through the stability machine, the bottom plate can tilt to a certain angle, do tilt static load test; 2. It can be used for repeated pressure fatigue test. It can be used for the test of crutches and other products. The basic introduction of this function: for example, set 150 kg, set 100000 times of test times, when the cylinder automatically presses down to 150 kg force value, it will automatically return, when the force value returns to 0, it will automatically press down to the set force value, so it will stop automatically after reaching the set number of times, and the test is completed;
二、百航椅子静载荷测试机基本参数特点： 1、大负载：500公斤；通过气缸压力调节； 2、保持时间：1小时以内，可以设置 3、测试的次数：1-999999，到达设定值自动停机； 4、采用气动程序控制，用气缸加力传感器方式，通过液晶屏显示参数； 5、龙门架高度约2米，宽度1.3米，固定在静态稳定性试验机平板两测，可用于测试倾斜15度的静载测试，气缸伸出行程大于40CM，考虑到行程大，龙门架高度根据实际需要可能要增高，具体高度以实际为准； 6、适用产品矮座椅高度0.42米，高拐杖1.56米，高度偏差大，百航仪器采用电动调节，用马达带动丝杆调节气缸的高度； 7、电源：220V 8、气源：大于0.4MPA Characteristics of basic parameters of baihang chair static load tester: 1. Heavy load: 500kg; through cylinder pressure adjustment; 2. Holding time: within 1 hour, it can be set; 3. Test times: 1-999999, it will stop automatically when it reaches the set value; 4. It adopts pneumatic program control, uses pneumatic cylinder afterburner sensor mode, and displays parameters through LCD screen; 5. The height of the gantry is about 2 meters and the width is 1.3 meters. It is fixed on the flat plate of the static stability testing machine and can be used to test the static load with an inclination of 15 degrees. The extended stroke of the cylinder is more than 40 cm. Considering the large stroke, the height of the gantry may be increased according to the actual needs, and the specific height shall be subject to the actual situation; 6. The height of low seat is 0.42m, the height of high crutch is 1.56m, the height deviation is large, baihang instrument adopts electric adjustment, and motor drives screw rod to adjust the height of cylinder; 7. Power supply: 220V; 8. Air source: more than 0.4MPa
东莞市百航仪器有限公司厂家生产的家具检测设备有： 办公椅反复(一次性）冲击试验机 办公椅扶手耐久强度试验机 办公椅靠背、扶手强度试验机 椅子座面冲击测试机 办公椅座面靠背耐久性试验机 沙发座面冲击测试机 沙发扶手、靠背耐久测试机 沙发综合耐久性试验机 ... 东莞市百航仪器有限公司提供助行器倾斜静载疲劳试验机椅子静载荷测试机,包括倾斜静载疲劳试验机,椅子静载荷测试机,座面靠背耐久性试验机,助行器检测设备厂家的详细产品价格、产品图片等产品介绍信息。The furniture testing equipment produced by Dongguan baihang Instrument Co., Ltd. includes: office chair repeated (one-time) impact test machine office chair armrest durability test machine office chair back, armrest strength tester chair seat surface impact tester, office chair seat back durability test machine sofa seat surface impact tester sofa armrest, backrest durability tester Dongguan baihang Instrument Co., Ltd. provides the static load testing machine for the chair of the inclining static load fatigue testing machine, including the inclined static load fatigue testing machine, the chair static load tester, the seat back durability test machine, the detailed product price, product picture and other product introduction information of the testing equipment factory.
在线问
