浙江轮椅车试验机供应商 上海轮椅车双辊疲劳试验机定制生产
¥100.00
供应轮椅车疲劳测试机 百航牌轮椅车整套测试设备
¥29000.00
供应百航圆盘式脚轮测试机 BH-8002脚轮试验机
¥25500.00
供应医用床承载负荷测试机定制生产
¥100.00
供应百航牌医疗床耐久性寿命检测仪
¥100.00
供应百航直销BH-6026 闭门器耐久性寿命试验机
¥35000.00
新品增强版轮椅车双辊疲劳测试机***7176轮椅车双滚疲劳试验机
东莞市百航仪器有限公司厂家做为生产轮椅车试验检测仪器设备的厂家在广东、浙江、江苏、上海、山东、四川、北京及广东各市等全国各地已有一批客户在使用，每次生产前都会与客户仔细确认技术参数，并根据客户的实际使用过程中提出的建议不断改良产品，来实现操作更简单，试验更快捷，测试更，更方便，请来电咨询我们。
双辊疲劳测试机设备有国标和欧标两个国准，分别是*** 7176-8及GB/T18029.8，国标是在欧标的基础上制定的，欧标的检测更为严格。常用的测试项目有：动态疲劳测试、垂直跌落测试、摆锤冲击测试、静态稳定测试、静态持久强度测试，制动疲劳测试，这几个测试是常用也是基本的，百航仪器公司根据国标和欧标开发设计了整套检测设备，产品都是定制生产的，我们有丰富的生产经验，目前产品已销全国各地。
Dongguan baihang Instrument Co., Ltd., as a manufacturer of wheelchair test and detection instruments and equipment, has a group of customers in Guangdong, Zhejiang, Jiangsu, Shanghai, Shandong, Sichuan, Beijing and Guangdong cities all over the country. Before each production, it will carefully confirm the technical parameters with the customers and continuously improve the products according to the suggestions put forward by the customers in the actual use process, To achieve simpler operation, faster test, more convenient test, please call us.
The equipment of double roll fatigue tester has two national standards: national standard and European standard, namely *** 7176-8 and GB / t18029.8. The national standard is formulated on the basis of European standard, and the detection of European standard is more strict. Common test items include: dynamic fatigue test, vertical drop test, pendulum impact test, static stability test, static endurance strength test and braking fatigue test. These tests are common and basic. Baihang instrument company has developed and designed a complete set of testing equipment according to national and European standards. All products are customized and produced. We have rich production experience, At present, the products have been sold all over the country.
主要技术参数：
1、PLC+触摸屏+程序控制；
2、设备大负载：200-300KG；
3、变频器+电机+减速箱各2套，两个滚筒能单独控制；
5、测试速度：0-95米/分钟，可调。即0-5.5公里/小时；
6、测试距离：0-9998999M， 可设置；到达设定值自动停机
7、测试转数：0-9998999转 可设置，到达设定值自动停机
8、电源三相：380V，50HZ；
9、转轮直径: Φ250mm±20mm×1100mm；
10、前后调节距离: 300～1020mm；
11、长宽高约：2200*1340*1750mm；
12、具有停电自动保存测试记录；
14、配有微型打印机打印测试结果；
1. PLC + touch screen + program control;
2. Large load of equipment: 200-300kg;
3. 2 sets of frequency converter + motor + reducer, and the two rollers can be controlled separately;
5. Test speed: 0-95 M / min, adjustable. I.e. 0-5.5 km / h;
6. Test distance: 0-999899m, settable; Automatic shutdown upon reaching the set value
7. Test Revolution: 0-9998999 revolutions can be set, and it will stop automatically when reaching the set value
8. Three phase power supply: 380V, 50Hz;
9. Runner diameter: Φ 250mm±20mm × 1100mm；
10, adjusting distance before and after: 300 ~ 1020mm;
11. Length, width and height: about 2200 * 1340 * 1750mm;
12. Have the ability to automatically save test records after power failure;
14. Equipped with micro printer to print test results;
在线问
