西门子7KG9661-1FA30-1AA0电流变送器
数字测量设备 变送器 SICAM T, 不带显示器的凹顶导轨装置, 外壳 96mm x 96mm x 100mm, IP20,2 个二进制输出端, 以太网接口,带 Modbus TCP, 欧姆分压器, 4 个模拟输出端, 串行接口/通信协议 RS485/IEC60870-5-103/Modbus RTU
西门子代理商现货供应
上海斌勤电气技术有限公司
发布人:康奎 (销售经理)发布
本公司签约正式的销售合同,并开具13%的增-值-税-发-票。
外地客户统一采用快递发货,也支持上门提货,货物快递到您手时候,一定要开箱检验!如有损坏,请拒绝签收,并由快递公司返回!
在你签收后表示你对该货物没有异议!我们会给予您检测时间,并请在货物到给予确认,谢谢合作!
产品均为密封包装,外包装详见产品图片,白色标签上均有产品订货号和产地,各位买家在收到货后,请核对型号,无误后再拆包装、
本公司宗旨:本着以诚信为本,以顾客为中心.质量***·服务诚信·价格实惠.
为用户提供专业的自动化产品及服务!
相关西门子产品技术:
7KG9661-1AA00-1AA0
数字测量设备 变送器 SICAM T, 不带显示器的凹顶导轨装置, 外壳 96mm x 96mm x 100mm, IP20,2 个二进制输出端, 以太网接口,带 Modbus TCP, 欧姆分压器, 无直流模拟输出端, 无串口和 通信协议
显示价格
7KG9661-1AA10-1AA0
数字测量设备 变送器 SICAM T, 不带显示器的凹顶导轨装置, 外壳 96mm x 96mm x 100mm, IP20,2 个二进制输出端, 以太网接口,带 Modbus TCP, 欧姆分压器, 无直流模拟输出端, 采用 RS485/Modbus RTU
显示价格
7KG9661-1AA30-1AA0
数字测量设备 变送器 SICAM T, 不带显示器的凹顶导轨装置, 外壳 96mm x 96mm x 100mm, IP20,2 个二进制输出端, 以太网接口,带 Modbus TCP, 欧姆分压器, 无直流模拟输出端, 采用 RS485/ IEC 60870-5-103 和 Modbus RTU
显示价格
7KG9661-1FA00-1AA0
数字测量设备 变送器 SICAM T, 不带显示器的凹顶导轨装置, 外壳 96mm x 96mm x 100mm, IP20,2 个二进制输出端, 以太网接口,带 Modbus TCP, 欧姆分压器, 4 个模拟输出端, 无串口和 通信协议
显示价格
7KG9661-1FA10-1AA0
数字测量设备 变送器 SICAM T, 不带显示器的凹顶导轨装置, 外壳 96mm x 96mm x 100mm, IP20,2 个二进制输出端, 以太网接口,带 Modbus TCP, 欧姆分压器, 4 个模拟输出端, 串行接口/通信协议 RS485 / Modbus RTU
显示价格
7KG9661-1FA30-1AA0
数字测量设备 变送器 SICAM T, 不带显示器的凹顶导轨装置, 外壳 96mm x 96mm x 100mm, IP20,2 个二进制输出端, 以太网接口,带 Modbus TCP, 欧姆分压器, 4 个模拟输出端, 串行接口/通信协议 RS485/IEC60870-5-103/Modbus RTU
显示价格
7KG9661-2AA00-1AA0
数字测量设备 变送器 SICAM T, 不带显示器的凹顶导轨装置, 外壳 96mm x 96mm x 100mm, IP20,2 个二进制输出端, 以太网接口,带 Modbus TCP,电 单独的变压器, 无直流模拟输出端, 无串口和 通信协议
显示价格
7KG9661-2AA10-1AA0
数字测量设备 变送器 SICAM T, 不带显示器的凹顶导轨装置, 外壳 96mm x 96mm x 100mm, IP20,2 个二进制输出端, 以太网接口,带 Modbus TCP,电 单独的变压器, 无直流模拟输出端, 采用 RS485/Modbus RTU
显示价格
7KG9661-2AA30-1AA0
数字测量设备 变送器 SICAM T, 不带显示器的凹顶导轨装置, 外壳 96mm x 96mm x 100mm, IP20,2 个二进制输出端, 以太网接口,带 Modbus TCP,电 单独的变压器, 无直流模拟输出端, 采用 RS485/ IEC 60870-5-103 和 Modbus RTU
显示价格
7KG9661-2FA00-1AA0
数字测量设备 变送器 SICAM T, 不带显示器的凹顶导轨装置, 外壳 96mm x 96mm x 100mm, IP20,2 个二进制输出端, 以太网接口,带 Modbus TCP,电 单独的变压器, 4 个模拟输出端 无串口和 通信协议
概述
Description - SICAM T
SICAM T is an digital measurement transducer that allows the measuring of electrical quantities in electrical networks in a single unit. In industries, power plants and substations, transducers are especially used for measurand (e.g. current, voltage, power, phase angle, energy or frequency) assignment into further processing through analog outputs or communication interface for precise control, notification or visualization tasks.
Features
Design: Compact and robust for flexible application in industrial and utility environments
Connections in 1-phase systems, in 3-wire and 4-wire systems
Applications: Flexible for power utilities, industrial and commercial sector applications
Measurements: up to 60 measured or calculated values available
Temperature range: -25 °C to +55 °C/-13 °F to 131 °F
Uncertainty: typically 0.1 % for voltage and current at rated input IEC 60688, and 0.2 s acc. to IEC 62053-21
High EMC immunity: according to standards EN 61000-6-2 and EN 61000-6-4 for the EMC directives, and with the standard EN 61010-1 for the low-voltage directive
UL Certfication: This product is UL-certified to standard UL 61010-1.
Highlights
Flexible current measurement range (up to 2 × In))
4 fast analog outputs (reaction approx. 120 ms at 50 Hz and 100 ms at 60 Hz) for reliable control
2 individual binary outputs for fast switching, indications (e.g., limit violation) and operation status monitoring
4 LEDs for local status visualization
Ethernet communications via IEC 61850 and MODBUS TCP and serial interface via MODBUS RTU or IEC 60870-5-103
Internal battery for real time clock and saving of energy counter values in case of a power outage
User-friendly operation through Web server (no extra software for parameterization needed, no converters and extra cables)
Real time clock (RTC), field bus synchronization or network synchronization possible via NTP.
Product homepage - downloads from the internet (catalogs, firmware and device drivers, manuals)
/sicam-t
应用
Conversion and integration of measurands into substation automation, protection or SCADA process via RTU and/or via protocols IEC 61850 (for 7KG9662 variant), MODBUS TCP, IEC 60870-5-103 for further control and/or monitoring tasks
Monitoring of lower voltage levels and heavy load control, e.g. air conditioning and motors
Depending on the device type, the input circuits for voltage measurement are either designed as voltage dividers or they are galvanically ***lated. Devices with galvanic ***lation can be used without voltage transformers in the power systems IT, TT and TN. Devices with a voltage divider can also be used in these power systems; for IT power systems, however, an upstream voltage transformer is required.
功能
Device type
Top-hat rail mounted device
Plastic case 96 mm × 96 mm × 100 mm / 3.78 in. x 3.78 in. x 3.94 in. (W × H × D)
Degree of protection: IP20
Input and output circuits
4 inputs for alternating voltage measurements
3 inputs for alternating current measurements up to 10 A continuous
4 optional DC analog outputs freely configurable:
Direct currents: 0 mA to 20 mA, 4 mA to 20 mA and -20 mA to 20 mA
Direct voltages: 0 V to 10 V and -10 V to 10 V
Individually programmable binary outputs
Signalization LEDs
Automatically monitor the functions of its hardware, software, and firmware components.
Communication
Ethernet: IEC 61850 or MODBUS TCP communication protocol
Optional serial RS485 interface that enables the device to communicate via the MODBUS RTU or the IEC 60870-5-103 communication protocol.
Measurands
The following measurands can be recorded or calculated from the measured quantities:
TRMS (True RMS) for alternating voltage and current
Active, reactive and apparent power
Active, reactive and apparent energy
Power frequency
Phase angle
Power factor and active power factor
Voltage and current unbalance
Mean value of the 3 phase voltages: Vavg
Mean value of the 3 phase currents: Iavg..
Time synchronization
For a common time basis when communicating with peripheral devices and time stamping of the process data.
External time synchronization via Ethernet NTP
External time synchronization via field bus using the MODBUS RTU or the IEC 60870-5-103 communication protocol
Internal time synchronization via RTC (if external time synchronization is not available).
Response time for analog and binary outputs
The faster response time of the analog and binary output is a very important feature of SICAM T that enables a reliable reaction of the controlling applications. The response time of the device is 120 ms at 50 Hz and 100 ms at 60 Hz.