3500/22M本特利BENTLY瞬态数据接口模块原装供应卡件

¥2500.00 1个起批
¥1800.00 ≥2

参数

产品保障产品特性
否是否进口
欧美产地

发货地广东深圳 5天内发货供货总量1200个

深圳长欣自动化设备有限公司 4年: 进入店铺在线咨询

3500/22-01-01-00本特利BENTLY瞬态数据接口模块原装供应卡件 ¥1800.00

3500/22-01-02-00本特利BENTLY瞬态数据接口模块原装供应卡件 ¥1800.00

3500/22-02-02-00本特利BENTLY瞬态数据接口模块原装供应卡件 ¥1800.00

3500/22-01-01-01本特利BENTLY瞬态数据接口模块原装供应卡件 ¥1800.00

3500/22-02-02-01本特利BENTLY瞬态数据接口模块原装供应卡件 ¥1800.00

3500/25改进的键相器模块BENTLY本特利欧美进口PLC卡件 ¥1578.00

产品详情

If you need our products, please contact us in advance------------同系列同品牌更多产品请留言喔。

------------我们及时为您服务！！

.①Allen-Bradley：1756、1785、1771、1746全系列系统等 Rockwell（罗克韦尔）：ICS系统。 1394C-SJT22-A 1394，1326系列变频/ 1756-L73 1756系列CPU

②Schneider(施耐德电气)系列产品》施耐德Schneider处理器控制卡电源模块 Modicon（莫迪康）：AS系列PLC系统备件 140CPU67260 140CPU65150 等140系列CPU

③General electric(通用电气)系列产品》GE（通用电气）：IC698/IC697全系列PLC系统、模块、卡件、驱动器等各类备件

④EMERSON（艾默生）:模块、卡件、驱动器等各类备件。Westinghouse（西屋）：1C31系列DCS系统、CPU、OVATION系统、WDPF系统、WEStation系统备件。 5X00170G01 5X系列，1C311系列

⑥销售ABB Robots. FANUC Robots、YASKAWA Robots、KUKA Robots、Mitsubishi Robots、OTC Robots、Panasonic Robots、MOTOMAN Robots。

⑦estinghouse(西屋)： OVATION系统、WDPF系统、MAX1000系统备件。

⑧Invensys Foxboro(福克斯波罗)：I/A Series系统，FBM(现场输入/输出模块)顺序控制、梯形逻辑控制、事故追忆处理、数模转换、输入/输出信号处理、数据通信及处理等。Invensys Triconex: 冗余容错控制系统、基于三重模件冗余(TMR)结构的现代化的容错控制器。

⑨PROSOFT MVI56-LTQ MVI56-MNET MVI56E-MNET MV156E-MCMR MVI56-PDPS MVI56-PDPMV1

⑩Bosch Rexroth（博世力士乐）：Indramat，I/O模块,PLC控制器,驱动模块 DKC，MKD，MSK 等控制器和电机 ⑪ Woodward（伍德沃德）：SPC阀位控制器、PEAK150数字控制器 9907-167 9907-164 9907-118

⑫Bently（本特利）：3500/3300系统 1900/6*** 3500/22M 3500/42M 3500系列

⑬ MOOG D136-001-007 D138-002-002 G122-829-001

⑭◆Motorola(摩托罗拉)：MVME 162、MVME 167、MVME1772、MVME177等系列。

⑮Triconex（英维思）:冗余容错控制系统、基于三重模件冗余（TMR）结构的现代化的容错控制器。 3721 3625 4351B

The 3500/22M Transient Data Interface (TDI) is the interface between the 3500 monitoring system and compatible software (System 1 Condition Monitoring and Diagnostic software and 3500 System Configuration software). The TDI combines the function of a 3500/20 Rack Interface Module (RIM) with the data collection capability of a communication processor such as TDXnet. The TDI resides in the slot adjacent to the power supplies of a 3500 rack. It interfaces with M series monitors (3500/40M, 3500/42M, etc.) to continuously collect steady state and transient dynamic (waveform) data and pass this data through an Ethernet link to the host software. Refer to the Compatibility section at the end of this document for more information. Static data capture capability is standard with the TDI. However, using an optional Channel Enabling Disk will allow the TDI to capture dynamic and high-resolution transient data as well. The TDI incorporates the communication processor function within the 3500 rack. Although the TDI provides certain functions common to the entire rack, it is not part of the critical monitoring path and has no effect on the proper, normal operation of the overall monitor system for automatic machinery protection. Every 3500 rack requires one TDI or RIM, which always occupies Slot 1 (next to the power supplies).Indicates when the 3500/22M is operating properly TX/RX LED Indicates when the 3500/22M is communicating with the other modules in the rack TM LED Indicates when the 3500 rack is in Trip Multiply mode CONFIG OK LED Indicates that the 3500 rack has a valid configuration I/O Module OK Relay Function Indicates when the 3500 rack is operating normally or when a fault has been detected within the rack. User can select either an “OPEN” or “CLOSED” contact to annunciate a NOT OK condition. This relay always operates as “Normally Energized”. Ratings Standard OK Relay is rated to *** @ 24 Vdc/120 Vac, 120 Watts/600 VA Switched Power (maximum) OK Relay with gold-plated contacts is rated down to 1 mA @ 1 Vdc (minimum) Arc Protection Arc suppressors are provided.Clears latched alarms and Timed OK Channel Defeat in the rack. Performs same function as “Rack Reset” contact on I/O module Address switch Used to set the rack address: 127 possible addresses Configuration Keylock Used to place 3500 rack in either “RUN” mode or “PROGRAM” mode. RUN mode allows for normal operation of the rack and locks out configuration changes. PROGRAM mode allows for normal operation of the rack and also allows for local or remote rack configuration. The key can be removed from the rack in either position, allowing the switch to remain in either the RUN or PROGRAM position. Locking the switch in the RUN position allows you to restrict unauthorized rack reconfiguration. Locking the switch in PROGRAM position allows remote reconfiguration of a rack at any time.

为您推荐