IC695CPU315网关通讯模块GE通用电气DCS系统工控应用系列全
¥1352.00
IC693ALG442 网关通讯模块GE通用电气DCS系统工控应用系列全
¥1352.00
HE693DNT250模块GE通用系统控制DCS通讯备件 详情咨询参数全
¥1352.00
The Horner High Resolution Strain Gage Input Module allows bridged strain gages (load cells) to be directly connected to the PLC without external signal processing (transducers, transmitters, etc.). All analog and digital processing of the signal is performed on the module, and precision millivolt values are written to the Series 90-30 %AI input table with 16 bit resolution. The input range of this module is +/-20mV, +/-25mV, or +/- 30mV configurable through Logicmaster on a channel-by-channel basis. This provides a resolution of approximately 0.6uV, 0.8uV, or 0.9uV, respectively. Also, individual channels can be turned off, so that unused channels do not increase module response time. Another ability of this module is to monitor the load cell excitation voltage, and compensate for variations in this signal. Excitation voltage output is not supplied by the module. The HE693STG883 also features a setpoint for each channel, set with %AQ values and enunciated with %I inputs. Outputs (%Q) allow the ladder logic to trigger the module to perform a ZERO, TARE, or CLEAR function, critical for weighing applications.
| Steady-State Power Consumption | ADC415: .4W /80 mA @ 5V 2.16W /90 mA @ 24V, ADC 420: .7W /140 mA at 5V 1.2W /50 mA @ 24V |
| Surge Current at Power-Up | ADC415: 120mA @ 5V 150mA @ 24V, ADC420: 200mA @ 5V 100mA @ 24V |
| Number of Channels | 4 |
| Input Range | 4-20mA, +/-20mA |
| I/O Required | 4 %AI, 4 %AQ, 16 %I |
| A/D Type, Resolution | Integrating, 18 bits |
| Useable Resolution | 13 bits plus sign |
| Module Update Rate | 45 channels/S |
| Input Impedance | 100 ohms |
| Digital Filtering | 1-128 samples / update |
| Analog Filtering | 1KHz, 3 pole Bessel |
| Maximum Error | .05% full scale |
| Input Impedance | 1 Megohm |
| Channel to Channel (ADC410) | 1500VAC (RMS), +/- 2000VDC |
| Common Mode Range (ADC410) | 1500VAC (RMS), +/- 2000VDC |
| Channel to Channel (ADC405) | 500VAC (RMS), +/-700VDC |
| Common Mode Range (ADC405) | 500VAC (RMS), +/-700VDC |
| Common Mode Rejection | >100dB |
| Relative Humidity | 5% to 95%, non-condensing |
| Operating Temperature | The HE693THM409 allows thermocouple temperature sensors to be directly connected to the PLC without external signal processing (transducers, transmitters, etc.). All analog and digital processing of the thermocouple signal is performed on the module. These modules have a resolution of 0.5°C, and temperature values may be reported to the PLC %AI I/O table in 0.5°C or 0.5°F increments. 0 to 60°C (32 to 140°F) |
-----------------------------------
主营产品：
Foxbore: I / a series system, FBM full series (field I / O module)
Sequence control, ladder logic control, accident recall processing, digital to analog conversion, input / output signal processing, data communication and processing, etc.
Vestinghouse (Westinghouse): spare parts for 1c31 series DCS system, CPU, ovati0n system, WDPF system and westation system.
Triconex: redundant fault-tolerant control system, modern fault-tolerant controller based on triple module redundancy (TMR) structure.
Emerson: modules, cards, drives and other spare parts.
Xycom: xvme series
Bently: 3500 / 3300 system.
Rockwell: ICs system.;
ABB: PM full series DCS system, ICT high voltage frequency converter series, dsqc series of industrial robot spare parts, infi 90, etc.
Bailey: BRC series DCS system, etc.
Allen Bradley: 1756, 1785, 1771, 1746 series systems, etc.
Yokogawa (Yokogawa): CP series, etc.
Honeywell: TK / TC / CC system, etc.
Reliance: 57c series, etc.
Modicon: as series PLC system spare parts.
Moore, a West sub CNC system, etc.
Motorola: mvme 162, mvme 167, myvme1772, mvme177 and other series.
Xycom: I / 0, vmee board, processor, etc.
Ge (General Electric): ic698 / ic697 full range of PLC systems, modules, cards, drives and other spare parts.
YASKAWA: servo controller, servo motor, servo driver.
Bosch Rexroth: indramat, I / O module, motor, PLC controller, drive module, etc.
Woodward: SPC valve position controller, peak150 digital controller.
IC693BEM331A, IC693BEM331B, IC693BEM331C, IC693BEM331D, IC693BEM331E, IC693BEM331F, IC693BEM331G, IC693BEM331H, IC693BEM331I, IC693BEM331J, IC693BEM331K, IC693BEM331L, IC693BEM331M, IC693BEM331N, IC693BEM331P, IC693BEM331Q, IC693BEM331R, IC693BEM331S, IC693BEM331T, IC693BEM331U, IC693BEM331V, IC693BEM331W, IC693BEM331X, IC693BEM331Y, IC693BEM331Z
GE Fanuc 90-70 IC697CPX928 is a 96 MHz, 32-Bit, Floating Point, 6 Mbyte (Medium) Memory CPU. The GE Fanuc 90-70 IC697CPX928 single slot CPU provides three serial ports, 6 Mbytes of battery-backed memory in the same slot. GE Fanuc 90-70 IC697CPX928 contains 256K of non-volatile user flash memory and supports 12K inputs and outputs and up to 8K analog I/O channels.
IC697CPX928A, IC697CPX928B, IC697CPX928C, IC697CPX928D, IC697CPX928E, IC697CPX928F, IC697CPX928G, IC697CPX928H, IC697CPX928I, IC697CPX928J, IC697CPX928K, IC697CPX928L, IC697CPX928M, IC697CPX928N, IC697CPX928P, IC697CPX928Q, IC697CPX928R, IC697CPX928S, IC697CPX928T, IC697CPX928U, IC697CPX928V, IC697CPX928W, IC697CPX928X, IC697CPX928Y, IC697CPX928Z, IC697CPX928-AA, IC697CPX928-AB, IC697CPX928-AC, IC697CPX928-AD, IC697CPX928-AE, IC697CPX928-AF, IC697CPX928-AG, IC697CPX928-AH, IC697CPX928-BA, IC697CPX928-BB, IC697CPX928-BC, IC697CPX928-BD, IC697CPX928-BE, IC697CPX928-BF, IC697CPX928-BG, IC697CPX928-BH, IC697CPX928-CA, IC697CPX928-CB, IC697CPX928-CC, IC697CPX928-CD, IC697CPX928-CE, IC697CPX928-CF, IC697CPX928-CG, IC697CPX928-DA, IC697CPX928-DB, IC697CPX928-DC, IC697CPX928-DD, IC697CPX928-DE, IC697CPX928-DF, IC697CPX928-DG, IC697CPX928-EA, IC697CPX928-EB, IC697CPX928-EC, IC697CPX928-ED, IC697CPX928-EE, IC697CPX928-EF, IC697CPX928-EG, IC697CPX928-FA, IC697CPX928-FB, IC697CPX928-FC, IC697CPX928-FD, IC697CPX928-FE, IC697CPX928-FF, IC697CPX928-FG, IC697CPX928-GA, IC697CPX928-GB, IC697CPX928-GC, IC697CPX928-GD, IC697CPX928-GE, IC697CPX928-GF, IC697CPX928-GG, IC697CPX928-GJ, IC697CPX928-GK, IC697CPX928-HA, IC697CPX928-HB, IC697CPX928-HC, IC697CPX928-JC, IC697CPX928-JD, IC697CPX928-JE
在线问
