AB 5069-OB1616点数字量输出模块

面议

参数

备件产品特性
否是否进口
原产地产地

发货地福建厦门 15天内发货供货总量8个

厦门控匠自动化科技有限公司 4年: 进入店铺在线咨询

AB 80026-044-06-RPowerFlex 7000变频器功率板卡 ¥3675.00

AB MPL-B540D-MJ24AA伺服电机面议

AB SK-G9-GDB1-D292中高压变频器散热风机主板 ¥7565.00

本特利Bently 3500/50 面议

本特利Bently 3500/22M 面议

本特利Bently 3500/05-01-BXX-CXX-DXX-EXX 面议

产品详情

5069-OB1616点数字量输出模块

5370-CVIM通讯交互模块

Important User Information Solid state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines for the Application, Installation and Maintenance of Solid State Controls (publication SGI-1.1 available from your local Rockwell Automation sales office or online at ) describes some important differences between solid state equipment and hard-wired electromechanical devices. Because of this difference, and also because of the wide variety of uses for solid state equipment, all persons responsible for applying this equipment must satisfy themselves that each intended application of this equipment is acceptable. In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use or application of this equipment. The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability for actual use based on the examples and diagrams. No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or software described in this manual. Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc., is prohibited. Throughout this manual, when necessary, we use notes to make you aware of safety considerations. Rockwell Automation, Allen-Bradley, TechConnect, PanelView, PanelView Component, and MicroLogix are trademarks of Rockwell Automation, Inc. Trademarks not belonging to Rockwell Automation are property of their respective companies. WARNING Identifies information about practices or circumstances that can cause an explosion in a hazardous environment, which may lead to personal injury or death, property damage, or economic loss. IMPORTANT Identifies information that is critical for successful application and understanding of the product. ATTENTION Identifies information about practices or circumstances that can lead to personal injury or death, property damage, or economic loss. Attentions help you identify a hazard, avoid a hazard, and recognize the consequence SHOCK HAZARD Labels may be on or inside the equipment, for example, a drive or motor, to alert people that dangerous voltage may be present. BURN HAZARD Labels may be on or inside the equipment, for example, a drive or motor, to alert people that surfaces may reach dangerous temperatures.

优势供应，充足库存

Human Interface Module, Snap-In, IP20 (NEMA Type 1) HASB Snap-In Cradle/Blank Plate HASP Programmer Only HCSP Programmer Only & Upload/Download Capability HAS1 Programmer/Controller w/Analog Pot HCS1 Programmer/Controller w/Analog Pot & Upload/Download Capability HAS2 Programmer/Controller w/Digital Pot HCS2 Programmer/Controller w/Digital Pot & Upload/Download Capability Human Interface Module, IP65/54 (NEMA Type 4/12) HJP Programmer Only HJ2 Programmer/Controller w/Digital Pot Communication Options –- B Frame & Up (Adapter 6) GM1 Single Point Remote I/O B Frame GM2 RS-232/422/485, DF1 & DH485 B Frame GM5 DeviceNet™ GM6 Enhanced DeviceNet™ Communication Options –- All Frames (Adapter 1) GMS1 GM1 with Snap-In Cradle GMS2 GM2 with Snap-In Cradle GMS5 GM5 with Snap-In Cradle GMS6 GM6 with Snap-In Cradle Control Interface Options L4 TTL Contact L4E TTL Contact & Encoder Feedback L7E TTL Contact & Encoder Fdbck. for use with Encoder Loss Detection L5 24V AC/DC L5E 24V AC/DC & Encoder Feedback L8E 24V AC/DC & Encoder Feedback for use with Encoder Loss Detection L6 115V AC L6E 115V AC & Encoder Feedback L9E 115V AC & Encoder Feedback for use with Encoder Loss Detection Analog Interface Options – Slot A • Choose No More than One • Configurable Inputs/Outputs are 10V or 20mA LA2 Two ***lated Configurable Inputs LA6 One ***lated Bi-polar Input (±10V or ±20mA) and One ***lated Thermistor Input LA7 One ***lated Bi-polar Input (±10V or ±20mA) and One ***lated Configurable Input Analog Interface Options – Slot B • Choose No More than One • Configurable Inputs/Outputs are 10V or 20mA LA1 Single-ended, Non-***lated Configurable (including Pot) Input & 2 Single-ended, Non-***lated Outputs (1 - Configurable, 1 - 20mA) LA3 Two ***lated Configurable Outputs LA4 One ***lated Configurable Input & Output LA5 ***lated Pulse Input, Non-***lated Pulse Output & Single-ended, Non-***lated Configurable Output