ABB-PU515A-3BSE032401R1端子模块现货供应
¥3137.00
ABB-PU516A-3BSE032402R1PXI模块使用方法教程
¥3137.00
ABB-REF542plus-1VCR007346-G0012伺服驱动
¥3137.00
产品标题：ABB-PPC322BE-HIEE300900R1输入输出模块使用配置教程
型号：ABB-PPC322BE-HIEE300900R1
质保：七天验收期，质保期一年
品牌： ABB
产品图片展示
产品详情资料：
每个PQM都预先编程设置了五条默认消息，如下所示。注意，每次
重新加载出厂设置点，用户编程的默认信息被覆盖
使用这些消息。
PQM将按所示顺序滚动显示默认消息。在操作PQM之前，必须输入设***定义系统
通过以下方法之一进行特性和报警设置：
1.前面板，使用按键和显示器。
2.后端子RS485端口COM1或COM2，或前RS232端口和计算机
运行GE提供的EnerVista PQM Setup通信程序
多联机或来自运行用户编写软件的SCADA系统。
可以使用上述任何一种方法输入相同的信息。然而，a
计算机使输入变得相当容易。此外，计算机允许设置点文件
存储并下载，以便快速、无错误地输入。为了促进这一过程，EnerVista
PQM设置编程软件可从GE Multilin获得。安装此软件后
在便携式计算机上，可以将所有设***下载到PQM。参见第6章
了解更多详细信息。
Each PQM is pre-programmed with five default messages as shown below. Note, each time
the factory setpoints are reloaded the user programmed default messages are overwritten
with these messages.
The PQM will scroll through the default messages in the sequence shown.Prior to operating the PQM, it is necessary to enter setpoints defining system
characteristics and alarm settings via one of the following methods:
1. Front panel, using the keys and display.
2. Rear terminal RS485 port COM1 or COM2, or front RS232 port and a computer
running the EnerVista PQM Setup communication program available from GE
Multilin or from a SCADA system running user-written software.
Any of the above methods can be used to enter the same information. However, a
computer makes entry considerably easier. Moreover, a computer allows setpoint files to
be stored and downloaded for fast, error-free entry. To facilitate this process, the EnerVista
PQM Setup programming software is available from GE Multilin. With this software installed
on a portable computer, all setpoints can be downloaded to the PQM. Refer to Chapter 6
for additional details.
在线问
