MVME177-016计数板工控系统PLC/DCS模块卡件备件设备

¥3278.00 1 - 9
¥3137.00 ≥10

参数

工控产品产品特性
否是否进口
美国产地

发货地江西瑞昌市 1天内发货供货总量5173个

瑞昌明盛自动化设备有限公司 4年: 进入店铺在线咨询

MVME177P-54SE光纤接口板工控系统PLC/DCS模块卡件备件设备 ¥3137.00

MVME177-012输入输出模块工控系统PLC/DCS模块卡件备件设备 ¥3137.00

MVME177-013电源模块工控系统PLC/DCS模块卡件备件设备 ¥3137.00

MVME177-014控制器工控系统PLC/DCS模块卡件备件设备 ¥3137.00

MVME172PA-644LE编码器工控系统PLC/DCS模块卡件备件设备 ¥3137.00

MVME172PA-644LSE调节器工控系统PLC/DCS模块卡件备件设备 ¥3137.00

产品详情

产品标题: MVME177-016计数板工控系统PLC/DCS模块卡件备件设备

型号：MVME177-016

品牌：MOTOROLA

产品图片展示

产品详情资料：

MVME177-016

准备系统机箱现在MVME187模块已准备好安装，请准备系统机箱并确定插槽分配（用于外围设备、转换模块等），如下所示：！小心在通电时插入或移除模块可能会损坏模块组件！警告：本设备中存在可能导致死亡的危险电压。在操作、测试和调整时要格外小心。关闭机箱和外围设备的所有电源。2断开交流电源电缆与电源的连接。3按照特定机箱或系统的用户手册所示，卸下机箱盖。4从机箱前部和后部的相应卡插槽中卸下填充面板（如果机箱具有后部卡固定框架）。如果MVME187被配置为系统控制器：如果它没有被配置成系统控制器：它必须安装在最左侧的卡插槽（插槽1）中，以正确启动总线授权菊花链，并正确运行IACK菊花链驱动程序。它可以安装在任何双倍高度的未使用卡插槽中。

产品英文详情料:

Preparing the System Chassis Now that the MVME187 module is ready for installation, prepare the system chassis and determine slot assignments (for peripherals, transition modules, etc.) as follows: ! Caution Inserting or removing modules while power is applied could result in damage to module components. ! Warning Dangerous voltages, capable of causing death, are present in this equipment. Use extreme caution when handling, testing, and adjusting.Turn all power OFF to chassis and peripherals. 2 Disconnect AC power cable from source. 3 Remove chassis cover as shown in the user&＃39;s manual for your particular chassis or system. 4 Remove the filler panel(s) from the appropriate card slot(s) at the front and rear of the chassis (if the chassis has a rear card cage). If the MVME187 is configured as system controller: If it is not configured as system controller: It must be installed in the left-most card slot (slot 1) to correctly initiate the bus-grant daisy-chain and to have proper operation of the IACK-daisy-chain driver. It may be installed in any doubleheight unused card slot.