3500 TDI(态数据接口)是3500之间的接口监控系统和GE的ystem 1*机减管理软件,的TD/结合了3,500 /20机架接口模块(RIM)的能力数据收集能力
350022M 138607-01 BENTLY 监测器模
3500 TDI(态数据接口)是3500之间的接口监控系统和GE的ystem 1*机减管理软件,的TD/结合了3,500 /20机架接口模块(RIM)的能力数据收集能力的通信处理器,如TDXnet,TD与M系列一起在3500机架的RIM插槽中运行监视器(3500/40M,3500/42M等)连续采集稳态和暂态波开数据,并将该数据通过以太网链路传递给主机软件(请参阅本文档未尾的兼容性部分。静态数据捕获是TD的标准配置,但是使用一个可选的通道启用磁盘将允许TDI捕获动态或瞬态数据。的与以前的通信相比,TDI在几个方面进行了改进并将通信处理器功能集成到3500架
350022M 138607-01 BENTLY 监测器模
尽管TD提供了整个机架通用的某些功能,但它并不是部分关键监控路径,对正常、正常无影响整个监控系统的运行,每3500机架需要一个TDI或RIM,它总是占用槽位1(电源旁边),对于二模几余(TMR)应用,3500系统需要-TMR版本的TD1,除了所有标准TDI功能外,TMR TDI还执行“监视器通道比较”。3500tmr雪置使用监控器选项中***的设置执行监控器投票,使用在这种方法中,TMR TDI不断地比较二(3)的输出。多余的监视。如果TD|检测到来自其中一个的信息监视器不再等同于其他监视器(在配置的***比内)两人监视器,它将监视器标记为错误,并将事件放置在系统事件列表
350022M 138607-01 BENTLY monitor mode
The 3500 TDI(State Data Interface) is a communication processor that combines the data collection capabilities of 3500/20 rack interface Module (RIM) capabilities between the 3500 interface monitoring system and GE's ystem 1* machine reduction management software, TD/ and TDXnet. Together with the M Series, the TD runs a monitor (3500/40m, 3500/42m, etc.) in the RIM slot of the 3500 rack to continuously collect steady-state and transient wave opening data and pass this data over the Ethernet link to the host software (see the compatibility section at the end of this document). Static data capture is standard for TDS, but enabling the disk with an optional channel will allow TDI to capture dynamic or transient data. Compared to previous communications, TDI has improved on several aspects and integrated communication processor capabilities into 3,500 units
350022M 138607-01 BENTLY monitor mode
Although TD provides certain functions common to the entire rack, it is not part of the critical monitoring path, normal, normal has no impact on the operation of the entire monitoring system, every 3500 rack needs a TDI or RIM, it always occupies slot 1(next to the power supply), for two-mode several more (TMR) applications, 3500 system needs the -TMR version of TD1. In addition to all standard TDI functions, TMR TDI also performs "monitor channel compar***n." The 3500tmr snow set performs monitor voting using the Settings specified in the monitor options, used in this method, the TMR TDI constantly compares the outputs of two (3). Extra surveillance. If TD| detects that the information monitor from one of the two monitors is no longer equivalent to the other monitor (within a configured percentage), it marks the monitor as an error and places the event in the system event list
在线问