低翘曲***POM TENAC 5050日本旭化成
¥34.00
日本旭化成POM TENAC 7050高流动
¥34.00
抗静电高流动POM TENAC 7054日本旭化成
¥34.00
10%玻纤增强POM TENAC GA510日本旭化成
¥34.00
抗蠕变低气味POM TENAC Z3010日本旭化成
Density / Specific Gravity | 1.42 | g/cm | ASTM D792,*** 1183 |
Melt Mass-Flow Rate (MFR)(190°C/2.16 kg) | 2.4 | g/10 min | *** 1133 |
Molding Shrinkage - Flow | 1.8 to 2.2 | % | Internal Method |
Water Absorption(24 hr, 23°C, 50% RH) | 0.20 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
Rockwell Hardness | ASTM D785 | ||
M-Scale | 94 | ||
R-Scale | 120 |
| Mechanical | Nominal Value | Unit | Test Method |
Tensile Modulus | 3000 | MPa | *** 527-1 |
Tensile Stress | |||
Yield | 70.0 | MPa | *** 527-2 |
-- | 69.0 | MPa | ASTM D638 |
Tensile Elongation(Break) | 50 | % | ASTM D638,*** 527-2 |
Flexural Modulus | |||
-- | 2700 | MPa | ASTM D790 |
-- | 2800 | MPa | *** 178 |
Flexural Strength | 96.0 | MPa | ASTM D790 |
Taber Abrasion Resistance | 13.0 | mg | ASTM D1044 |
| Impact | Nominal Value | Unit | Test Method |
Charpy Notched Impact Strength | 13 | kJ/m | *** 179 |
Notched Izod Impact | 120 | J/m | ASTM D256 |
在线问
