20%MF增强PP Lupol GP3200
¥18.30
耐候高刚PP Lupol HM3207
¥18.30
汽车内饰PP Lupol HI5204B
¥18.30
PP Lupol GP3209A矿物增强20%
¥18.30
抗紫外线PP Lupol HF5254A
¥18.30
汽车应用PP Lupol GP3202Z
¥18.30
经销韩国LG高光矿物增强PP Lupol HG3200SK2
Density / Specific Gravity | 1.05 | g/cm | ASTM D792 |
Melt Mass-Flow Rate (MFR)(230°C/2.16 kg) | 22 | g/10 min | ASTM D1238 |
Molding Shrinkage - Flow(3.20 mm) | 1.4 to 1.8 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
Tensile Strength2(Yield, 3.20 mm) | 29.4 | MPa | ASTM D638 |
Tensile Elongation2(Break, 3.20 mm) | 50 | % | ASTM D638 |
Flexural Modulus3(6.40 mm) | 1770 | MPa | ASTM D790 |
Flexural Strength3(6.40 mm) | 44.1 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
Notched Izod Impact(23°C, 3.20 mm) | 39 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
Deflection Temperature Under Load(1.8 MPa, Unannealed, 6.40 mm) | 70.0 | °C | ASTM D648 |
RTI Elec(1.5 mm) | 120 | °C | UL 746 |
RTI Imp(1.5 mm) | 120 | °C | UL 746 |
RTI Str(1.5 mm) | 120 | °C | UL 746 |
在线问
