SABIC PP 57MNK40耐低温高抗冲
¥18.00
SABIC PP 58MNK10高抗冲低翘曲
¥18.00
SABIC PP 595A 高刚汽车配件
¥18.00
SABIC PP 64M40T耐冲击抗静电
¥18.00
SABIC PP 66M10T防静电高刚
¥18.00
SABIC PP 6702K透明高光泽
¥18.00
SABIC PP 57MNK10耐寒抗冲击
Density / Specific Gravity 2 | 0.905 | g/cm³ | ASTM D792 |
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 12 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
Rockwell Hardness (R-Scale, Injection Molded) | 80 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
Tensile Strength (Yield, Injection Molded) | 24.0 | MPa | ASTM D638 |
Tensile Elongation (Yield, Injection Molded) | 4.0 | % | ASTM D638 |
Flexural Modulus - 1% Secant (Injection Molded) | 1150 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
Notched Izod Impact | ASTM D256 | ||
-20°C, Injection Molded | 63 | J/m | |
23°C, Injection Molded | 120 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
Deflection Temperature Under Load (0.45 MPa, Unannealed) | 90.0 | °C | ASTM D648 |
Vicat Softening Temperature | 148 | °C | ASTM D1525 |
在线问
