SABIC PPcompound 2606 耐刮擦低气味
¥18.00
- 商品
- 详情
SABIC PPcompound 19T1040滑石填充40%
- ¥19.00 25 - 999千克
- ¥18.00 ≥1000千克
参数
- 滑石填充PP产品特性
- 否是否进口
- 美国产地
广东 深圳
1天内发货
3000千克
SABIC PPcompound 2606 耐刮擦低气味
¥18.00
产品详情
SABIC PPcompound 19T1040滑石填充40%
Density | 1.25 | g/cm³ | *** 1183 |
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 18 | g/10 min | *** 1133 |
Molding Shrinkage 1 (24 hr, 3.20 mm) | 0.80 | % | Internal Method |
| Mechanical | Nominal Value | Unit | Test Method |
Tensile Modulus (Injection Molded) | 3600 | MPa | *** 527-1/1A |
Tensile Stress | *** 527-2/1A | ||
Yield, Injection Molded | 30.0 | MPa | |
Break, Injection Molded | 24.0 | MPa | |
Tensile Strain (Break, Injection Molded) | 11 | % | *** 527-2/1A |
Flexural Modulus 2 (Injection Molded) | 3600 | MPa | *** 178 |
| Impact | Nominal Value | Unit | Test Method |
Notched Izod Impact Strength | *** 180/1A | ||
-20°C, Injection Molded | 1.5 | kJ/m² | |
0°C, Injection Molded | 1.6 | kJ/m² | |
23°C, Injection Molded | 2.8 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
Deflection Temperature Under Load 3 (0.45 MPa, Unannealed) | 130 | °C | *** 75-2/B |
CLTE - Flow | |||
-30 to 30°C | 4.5E-5 | cm/cm/°C | ASTM D696 |
23 to 80°C | 9.0E-5 | cm/cm/°C | ASTM D696 |
-30 to 100°C | 6.8E-5 | cm/cm/°C | *** 11359-2 |
| Additional Information | Nominal Value | Unit | Test Method |
Filler Content | 40 | % | Internal Method |
为您推荐
在线问
产品参数
- 滑石填充PP
- 否
- 美国
- SABIC
- 19T1040
- 品牌经销
- 标准料
- PP
- 注塑级
- 增强级、 耐高温、 高强度、 高刚性
- 汽车部件、 电子电器部件、 运动器材、 家电部件、 电动工具配件
- SABIC
- 25KG/包
- 否
