- 商品
- 详情
加玻纤33% Amodel PPA AE-1133 美国苏威 电气元件 连接器 汽车电子
- ¥35.00 ≥1千克起批
参数
- 否是否进口
- 美国产地
- 美国苏威 厂家(产地)
广东 东莞
1天内发货
30000千克
产品详情
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.48 g/cc | 0.0535 lb/in³ | Method A; *** 1183 |
| Water Absorption | 0.21 % @Time 86400 sec | 0.21 % @Time 24.0 hour | ASTM D570 |
| Linear Mold Shrinkage, Flow | 0.0040 cm/cm | 0.0040 in/in | ASTM D955 |
| Linear Mold Shrinkage, Transverse | 0.0080 cm/cm | 0.0080 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell R | 125 | 125 | ASTM D785 |
| Tensile Strength at Break | 72.0 MPa @Temperature 175 °C | 10400 psi @Temperature 347 °F | *** 527-2 |
| 80.0 MPa @Temperature 150 °C | 11600 psi @Temperature 302 °F | *** 527-2 | |
| 148 MPa @Temperature 100 °C | 21500 psi @Temperature 212 °F | *** 527-2 | |
| 233 MPa @Temperature 23.0 °C | 33800 psi @Temperature 73.4 °F | *** 527-2 | |
| Tensile Strength | 221 MPa | 32100 psi | ASTM D638 |
| Elongation at Break | 2.5 % | 2.5 % | ASTM D638 |
| 2.5 % @Temperature 23.0 °C | 2.5 % @Temperature 73.4 °F | *** 527-2 | |
| 2.9 % @Temperature 100 °C | 2.9 % @Temperature 212 °F | *** 527-2 | |
| 8.5 % @Temperature 175 °C | 8.5 % @Temperature 347 °F | *** 527-2 | |
| 8.7 % @Temperature 150 °C | 8.7 % @Temperature 302 °F | *** 527-2 | |
| Tensile Modulus | 13.1 GPa | 1900 ksi | ASTM D638 |
| 4.30 GPa @Temperature 175 °C | 624 ksi @Temperature 347 °F | *** 527-2 | |
| 6.70 GPa @Temperature 150 °C | 972 ksi @Temperature 302 °F | *** 527-2 | |
| 10.8 GPa @Temperature 100 °C | 1570 ksi @Temperature 212 °F | *** 527-2 | |
| 13.4 GPa @Temperature 23.0 °C | 1940 ksi @Temperature 73.4 °F | *** 527-2 | |
| Flexural Strength | 317 MPa | 46000 psi | ASTM D790 |
| 80.0 MPa @Temperature 175 °C | 11600 psi @Temperature 347 °F | *** 178 | |
| 93.0 MPa @Temperature 150 °C | 13500 psi @Temperature 302 °F | *** 178 | |
| 227 MPa @Temperature 100 °C | 32900 psi @Temperature 212 °F | *** 178 | |
| 319 MPa @Temperature 23.0 °C | 46300 psi @Temperature 73.4 °F | *** 178 | |
| Flexural Modulus | 11.4 GPa | 1650 ksi | ASTM D790 |
| 3.60 GPa @Temperature 175 °C | 522 ksi @Temperature 347 °F | *** 178 | |
| 4.00 GPa @Temperature 150 °C | 580 ksi @Temperature 302 °F | *** 178 | |
| 9.80 GPa @Temperature 100 °C | 1420 ksi @Temperature 212 °F | *** 178 | |
| 11.6 GPa @Temperature 23.0 °C | 1680 ksi @Temperature 73.4 °F | *** 178 | |
| Compressive Strength | 185 MPa | 26800 psi | ASTM D695 |
| Poissons Ratio | 0.41 | 0.41 | ASTM E132 |
| Shear Strength | 101 MPa | 14600 psi | ASTM D732 |
| Izod Impact, Notched | 0.800 J/cm | 1.50 ft-lb/in | ASTM D256 |
| Izod Impact, Unnotched | 7.70 J/cm | 14.4 ft-lb/in | ASTM D256 |
| Izod Impact, Notched (***) | 8.80 kJ/m² | 4.19 ft-lb/in² | Type 1, Notch A; *** 180 |
| Izod Impact, Unnotched (***) | 49.0 kJ/m² | 23.3 ft-lb/in² | Type 1; *** 180 |
| Charpy Impact Unnotched | 7.30 J/cm² | 34.7 ft-lb/in² | Type 1, Edgewise; *** 179 |
| Charpy Impact, Notched | 0.950 J/cm² | 4.52 ft-lb/in² | Type 1, Edgewise, Notch A; *** 179 |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 1.00e+16 ohm-cm | 1.00e+16 ohm-cm | ASTM D257 |
| Dielectric Constant | 4.2 @Frequency 1.00e+6 Hz | 4.2 @Frequency 1.00e+6 Hz | ASTM D150 |
| 4.4 @Frequency 60.0 Hz | 4.4 @Frequency 60.0 Hz | ASTM D150 | |
| Dielectric Strength | 21.0 kV/mm @Thickness 3.20 mm | 533 kV/in @Thickness 0.126 in | ASTM D149 |
| Dissipation Factor | 0.0050 @Frequency 60.0 Hz | 0.0050 @Frequency 60.0 Hz | ASTM D150 |
| 0.017 @Frequency 1.00e+6 Hz | 0.017 @Frequency 1.00e+6 Hz | ASTM D150 | |
| Arc Resistance | 140 sec | 140 sec | ASTM D495 |
| Comparative Tracking Index | 550 - 600 V | 550 - 600 V | UL 746 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear, Parallel to Flow | 24.0 µm/m-°C @Temperature 0.000 - 100 °C | 13.3 µin/in-°F @Temperature 32.0 - 212 °F | ASTM E831 |
| 27.0 µm/m-°C @Temperature 100 - 200 °C | 15.0 µin/in-°F @Temperature 212 - 392 °F | ASTM E831 | |
| CTE, linear, Transverse to Flow | 55.0 µm/m-°C @Temperature 0.000 - 100 °C | 30.6 µin/in-°F @Temperature 32.0 - 212 °F | ASTM E831 |
| 110 µm/m-°C @Temperature 100 - 200 °C | 61.1 µin/in-°F @Temperature 212 - 392 °F | ASTM E831 | |
| Melting Point | 313 °C | 595 °F | *** 11357-3 |
| 313 °C | 595 °F | ||
| Maximum Service Temperature, Air | 164 - 185 °C | 327 - 365 °F | Continuous; ASTM D794 |
| Deflection Temperature at 0.46 MPa (66 psi) | 297 °C @Thickness 3.20 mm | 567 °F @Thickness 0.126 in | Annealed; ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 280 °C | 536 °F | Unannealed; *** 75-2/A |
| 285 °C @Thickness 3.20 mm | 545 °F @Thickness 0.126 in | Annealed; ASTM D648 |
本公司长期销售 美国苏威 PPA，PPS，PAEK，PAI，PFA，PEEK, PPSU ,PSU ,PES，PARA，PAEK ，PTFE，PVDF ，ECTFE料多种型号
我司产品均可提供详细物性表(英文和中文版)相关资料；可开13%增值税发票；免费为客户分析样版并提供原料型号咨询服务(可免费帮客户翻译英文资料)；如需试料、了解产品相关信息及当日报价，敬请来电，竭诚为您服务！
为您推荐
在线问
产品参数
- 否
- 美国
- 美国苏威
- AE-1133
- 品牌经销
- 标准料
- 注塑级
- 增强级、 耐高温、 标准级
- 汽车部件、 电子电器部件、 运动器材、 家电部件、 电动工具配件、 薄壁制品
