Q941F-64C DN20 四氟耐腐高温电动不锈钢法兰球阀

¥343.00 9 - 19
¥330.00 ≥20

参数

冠桓品牌
Q941F-64C DN20型号
铸钢材质

发货地浙江永嘉县 2天内发货供货总量723套

上海冠桓泵阀有限公司 9年: 进入店铺在线咨询

Q941F-64C DN25 铸钢法兰电动球阀耐高温蒸汽电动切断球阀 ¥331.00

Q941F-64C DN32 Q941F 铸钢法兰式电动球阀水蒸汽油品 ¥332.00

Q941F-64C DN40 电动铸钢法兰高温不锈钢二通蒸汽水四氟球阀 ¥333.00

Q941F-64C DN50 不锈钢304法兰电动球阀配220V ¥460.00

Q941F-64C DN80 不锈钢法兰电动球阀/高温蒸汽切断阀比例调节阀 DN25 ¥339.00

Q941F-64C DN65 电动法兰球阀/电动调节阀/电动比例阀DN15~DN150 ¥335.00

产品详情

所有阀门系列详情及报价请咨询电话：153-5622-5255

Q941F-64C DN20 电动不锈钢法兰球阀Q941F-16P 四氟耐腐高温电动球阀DN40

产品实拍

产品特色

Q941F-64C DN20 电动不锈钢法兰球阀Q941F-16P 四氟耐腐高温电动球阀DN40

Q941F - 64 - c 3/4 "electric stainless steel flanged ball valves Q941F - 16 four fluorine corrosion of high temperature electric ball valve DN40 p

产品介绍：

产品说明

Q941F、Q941Y 型 PN16~PN63 电动球阀：电动驱动、法兰连接形式、浮动球直通式，阀座密封面材料有氟塑料 (Q941F)、硬质合金 (Q941Y)，公称压力 PN16~PN63、公称尺寸 DN15~DN300、适用温度为 -29~450℃，阀体材料有碳素钢、不锈钢和合金钢。

Q941F、Q941Y 型 PN16~PN63 电动球阀适用于两位切断、调节的场合。阀与执行机构的连接采用直连方式，由 UNIC、PSQ、HQ、DHL等电动执行器（也可根据用户要求配置其他型号电子式电动执行机构）与超短球阀组成。电动执行机构内置伺服系统，无须另配伺服放大器，输入 4-20mA 信号及 220V AC 电源即可控制运转。和普通电动球阀相比具有结构紧凑，体积小，重量轻，阀座与端面法兰距离近，物料滞留少，密封性能优越等特点。

Product introduction:

The product description

Q941F, Q941Y PN16 ~ PN63 electric ball valves, electric drive, flange connection, the floating ball straight through, valve seat sealing surface material with fluorine plastic (Q941F), cemented carbide (Q941Y), PN16 ~ PN63 nominal pressure, nominal size DN15 ~ 12, suitable temperature for - 29 ~ 450 ℃, body material is carbon steel, stainless steel and alloy steel.

Q941F, Q941Y PN16 ~ PN63 electric ball valve is suitable for both cutting and adjusting the occasion. Valve and actuator connection adopts direct method, by UNIC, PSQ, HQ, DHL and other electric actuator (also can according to customer&＃39;s requirements with other types of electronic electric actuators) and ultra short of ball valve. Electric actuators are built-in servo system, do not need to match servo amplifier, 4-20 ma signal input and 220 v AC power supply can control operation. Compared with ordinary electric ball valve has a compact structure, small volume, light weight, seat and end face of the flange is close, less material stranded, sealed performance is superior, etc.

产品性能参数

Q941F、Q941Y 型 PN16~PN63 电动球阀主要性能参数

型号	PN	工作压力 / MPa	适用温度 / ℃	适用介质
Q941F-16C	16	1.6	≤ 180	水、气、油
Q941F-25C	25	2.5
Q941F-40C	40	4.0
Q941Y-16C	16	1.6	≤ 425	水、气、油含颗粒介质
Q941Y-25C	25	2.5
Q941Y-40C	40	4.0
Q941F-16P	16	1.6	≤ 180	硝酸类
Q941F-25P	25	2.5
Q941F-40P	40	4.0
Q941Y-16P	16	1.6	≤ 450	水、气、油含颗粒介质
Q941Y-25P	25	2.5
Q941Y-40P	40	4.0
Q941F-16R	16	1.6	≤ 180	硝酸类
Q941F-25R	25	2.5
Q941F-40R	40	4.0
Q941Y-16R	16	1.6	≤ 450	水、气、油含颗粒介质
Q941Y-25R	25	2.5
Q941Y-40R	40	4.0
Q941F-16I	16	1.6	-29~150	水、蒸汽、气体、油品等
Q941F-25I	25	2.5
Q941F-40I	40	4.0
Q941F-63I	63	6.3