- 商品
- 详情
- 倍福品牌
- CX5620型号
- CANopen产品特性
The CX5620 is an Embedded PC based on the AMD Ryzen R1102G processor with a clock speed of 1.2 GHz (dual-core) and 4 GB DDR4-RAM. The basic equipment includes two independent, 2.5 Gbit-capable Ethernet interfaces as well as four USB 3.0 and one DVI-D interface. A replaceable, industry-standard M.2 SSD (SATA) is used as the boot and storage medium, enabling even faster read and write access and large-volume data handling. The M.2 SSD is easily accessible behind a flap to enable rapid hardware replacement in case of service, even on site.
CX5620是基于AMD Ryzen的嵌入式PC R1102G处理器，时钟速度为1.2 GHz（双核），4 GB DDR4-RAM。基本设备包括两个独立的2.5 Gbit以太网接口以及四个USB 3.0和一个DVI-D接口。可更换的行业标准M.2 SSD（SATA）用作引导和存储介质，实现更快的读写访问和大容量数据处理。M.2 SSD可在挡板后面轻松访问，以便在维修时（即使在现场）快速更换硬件。
A wide range of additional connection options or gateway functions are available thanks to the optional interface and I/O level, which can consist of either E-bus or K-bus terminals and can be fitted ex factory. In addition, a system module or fieldbus module from the CX2000 series can be plugged in via the high-pole connection on the left-hand side of the device. Although the total number of plug-in modules of the type CX2500-xxxx is limited to one with the CX5600 series, it is possible in this way, for example, to implement two further Gbit Ethernet interfaces or four further USB interfaces or a further fieldbus interface. Furthermore, the CX5620 is characterized by an internally electrically ***lated power supply unit with UPS-OCT capability, built-in 1-second UPS, low power consumption and fanless cooling.
由于可选的接口和I/O级别，可提供多种附加连接选项或网关功能，这些接口和I/O级可由E总线或K总线端子组成，并可在出厂时安装。此外，CX2000系列的系统模块或现场总线模块可以通过设备左侧的高极连接插入。虽然CX2500-xxxx型插件模块的总数***于CX5600系列中的一个，但通过这种方式，例如，可以实现另外两个Gbit以太网接口或另外四个USB接口或另外一个现场总线接口。此外，CX5620的特点是具有UPS-OCT功能的内部电隔离电源单元、内置1秒UPS、低功耗和无风扇冷却。
The TwinCAT automation software turns the CX5620 system into a high-performance PLC and motion control system that can be used with or without visualization. Both TwinCAT 2 in 32-bit mode and the latest TwinCAT 3 version in 64-bit mode are supported. Continuing support for TwinCAT 2 guarantees investment protection for projects and systems that were or will be created with this 32-bit generation. The extended operating temperature range from -25°C to +60°C allows use in climatically demanding applications.
TwinCAT自动化软件将CX5620系统转变为一个高性能PLC和运动控制系统，可用于或不用于可视化。支持32位模式的TwinCAT 2和64位模式的***TwinCAT 3版本。对TwinCAT 2的持续支持***了使用此32位版本创建的项目和系统的投资保护。从-25°C到+60°C的扩展工作温度范围允许在气候要求较高的应用中使用。
在线问
- 倍福
- CX5620
- CANopen
- 否
- 德国
- 否
- CPU模块
- CPU模块
