- 商品
- 详情
- 触摸屏产品特性
- 否是否进口
- 美国产地
IC697ALG6440D
IC697ALG6440D
simplicity展示站产品的主要特点是:
高性能simplicity显示站产品是高性能、ibm兼容的pc机，设计用于使用simplicity软件。的
系统架构基于80486DX2-66微处理器。每一个
simplicity显示站系统包含以下组件:
•486dx2-66 CPU
•500MB或更大的硬盘，simplicity和微软Windows操作系统
软件安装
•3.5英寸软盘驱动器
10.4英寸高亮度，双扫描，彩色平板显示
•触摸屏或Touch Pad鼠标
•一个RS-232端口
•一个RS-422/RS-232端口
•并行打印机端口
•以太网端口(10baseT和AUI连接器)
•PS/2外部键盘接口
•可移动板，可以修改，以允许访问用户添加的行业标准
架构(ISA)-兼容板(3/4长度，)-滑动站和触摸
***电台单位)。
机架安装简单显示站包装在一个单一的单位，钢
有法兰的外壳，可以安全地安装在机架上。触摸显示器
单位重量约14磅(6.4公斤)。触摸站和
滑翔站单元重约18.5磅(8.4公斤)。
易于操作每个简单显示站来准备运行，与
simplicity软件和操作系统软件安装在一起
硬盘。
•佩戴防静电带，并确保身体已完全接地
触摸显示器上的连接器。
•在寒冷干燥的天气要格外小心，因为静电很容易积聚。
1. 打开展示站。请确保您有以下项目:展示站
系统硬件，电源线，simplicity软件分发，微软Windows
软件分发、用户手册和数据表。
2. 把数据表归档到安全的地方。
3.检查损坏情况。
4. 请阅读文档包上的软件许可协议。如果不能接受，就不要
继续进行;返回系统。
5. 在本手册“前言”中提供的空白处记录计算机序列号。的
序列号位于单元框的背面。
6. 查看硬件描述。
7. 请参见“硬件安装”。
When selecting a location for the Display Station, make sure that there will be enough space for
access to the floppy disk drive and connectors located on the right side panel of the unit. Allow
approximately 6 inches (15.2 cm). For overall unit dimensions, refer to Figures 1-2 and 1-3.
Allow 2 inches (5.1 cm) depth for the power cord that is provided with the Display Station. If you
don’t have this amount of space, a lower profile power cord that requires less space can be
purchased.
The mounting location for the Display Station should meet the following requirements:
Caution
For Touch Display and Touch Station products: The protective film
covering on the touch screen is not suitable for use in conditions of
prolonged exposure to direct sunlight. (Exposure to sunlight through window
glass will not harm the protective film.)
Caution
Temperature in the Display Station operating environment should not
exceed 45°C/113°F. Exposing the Display Station to ambient temperatures
greater than this limit could damage the hardware or cause data to be lost.
You should monitor the temperature in the operating environment to ensure
that it does not exceed 45°C/113°F. The overtemperature indicator on the
Display Station is provided only as a secondary precaution. The Display
Station does not automatically shut down when the overtemperature
indicator is lighted.
Temperature rise should not exceed 20°C (68°F) per hour. Exposing the
Display Station to thermal shock could damage the disk drives. Note that the
operating temperature range of the Display Station is 0 to 45°C (32.0 to 113°F).
The operating temperature range of floppy disks is 5 to 40°C (41 to
104.0°F). Operating the floppy disk drive when the ambient temperature is
outside this range could damage the disk medium as well as cause
permanent damage to the floppy drive heads.
在线问
- 触摸屏
- 否
- 美国
- 否
- GE/通用电气
- IC697CMM741H
- 触摸屏
- 自动化行业
- 自动化控制
- CE
- 全自动
- 1
- 15
