AM11-DHA1A-000
AM11-DHA1A-000
表适用设备列表
设备类型设备名称通信容量
(每次通信)读写
一些设备
输入/输出继电器
对于a -兼容的1E帧:128字(2048
分)
对于qna兼容的3E帧:960字(15360
分)(* 2)
Y Y
链路输入(*1)Y Y
链路输出(*1)Y Y
内部继电器Y Y
锁存继电器(*1)Y Y
步进继电器(*1)Y Y
边缘继电器Y Y
播音员Y Y
链路继电器Y Y
特殊链路继电器Y Y
专用继电器Y Y
定时器(触点、线圈)Y Y
积分定时器(触点、线圈)Y Y
计数器(触点、线圈)Y Y
字设备
数据寄存器
对于a兼容的1E帧:256字
qna兼容3E帧:960字(*2)
Y Y
链接寄存器Y Y
定时器(当前值)Y Y
积分定时器(电流值)(*1)Y Y
计数器(当前值)Y Y
文件寄存器(*3)Y Y (*4)
特别登记册
特殊链接寄存器(*1)Y
索引寄存器(*1)Y
Y:适用
N:不适用
*1:可以使用qna兼容的3E帧进行通信。
*2:对于qna兼容的3E帧,每次通信的数据容量会随着
MELSEC CPU和接口模块。请确认MELSEC规格以了解更多细节。
*3:对于Q系列和QnA系列CPU,只能与QnA兼容的3E框架进行通信。
*4:对于Q系列或QnA系列CPU,不可能写入EEPROM文件寄存器
YFGW沟通
连接设备:现场无线网关
YFGW410现场无线管理站
YFGW710现场无线综合网关
Max。不。连接设备的:
每台ALE111 4台现场无线网关(*1)(*2)
Max。不。连接的ALE111:
每个现场无线网关4个模块(双冗余配置8个模块)(*1)(*2)
不。可连接的现场无线设备:128个单位/ALE111
2000台/FCS (FCS型号AFV30/AFV40)(*3)
1000台/FCS(除AFV30/AFV40外的所有FCS型号)(*3)
传输协议:Modbus/TCP
通信能力:。最多读125个单词/交流。写123字/交流
不。子系统站的:
最多128个站点/ALE111
(适用于CENTUM VP R5.02或更高版本,FCS主存为32mbyte及以上)
最多30个站点/ALE111
(适用于FCS主存16mbyte的CENTUM VP R5.02或更高版本,适用于CENTUM VP R5.01或
不管FCS的主内存大小)
CPU负载:
每2000台现场无线设备+/- 10%以内(FCS型号AFV30/AFV40)
每1000台现场无线设备+/- 10%以内(除AFV30/AFV40外的所有FCS型号)
数据采集周期:
每2000个现场无线设备1秒内(FCS型号AFV30/AFV40)(*4)
每1000个现场无线设备在1秒内(适用于除AFV30/AFV40外的所有FCS型号)(*4)
双冗余配置:
仅配置双冗余组网(YFGW410)
以太网通信模块仅双冗余配置(YFGW710)
*1:在子系统网络中只存在一个ALE111模块的单一配置下,最多可配置4个YFGW410单元
和/或YFGW710可以连接。当分系统网络中存在多个ALE111模块时,
YFGW410和YFGW710只能连接1台。
*2:在双冗余配置中,冗余的ALE111模块(。8个模块)存在,其中一个单元只有一个
可连接两台YFGW710或冗余(2台)YFGW410。如果ALE111模块设置为双冗余
配置时,无法连接单个(单机)YFGW410。
*3:如果一个通信定义(4字)每个现场无线设备。
*4:这是现场无线综合网关的数据采集周期。现场无线的数据更新周期
设备取决于每个设备的传输周期。
表适用设备列表
对象属性读写
AI(模拟输入)PV(过程数据)Y N
DI(数字输入)(*1)PV_B(过程数据)Y N
AO(模拟输出)(*1)OP(过程数据)N Y
DO(数字输出)(*1)OP_B(过程数据)N Y
AO(模拟量输出)(*1)Readback(回读)Y N
DO(数字输出)(*1)Readback_B(回读)Y N
UAPMO(用户应用管理对象)DIAG_STATUS(设备诊断信息)Y N
- gw_status (*1)
(现场无线管理站状况)Y N
- bbr_status (*1)
(现场无线接入点状态)Y N
—dev_status (*1)
(无线现场设备状态)Y N
Y:适用
N:不适用
*1:这些设备用于YFGW410。
DARWIN/DAQSTATION Communication
Connected device: Ethernet communication module DT300-41 (DARWIN) (STYLE S8 or later)
(DAQSTATION must be equipped with Ethernet in the main unit)
Connection method: Ethernet communication via a hub. A crossover cable can also be used for a connection
without a hub.
Applicable devices:
DARWIN: DA100, DC100, DR231, DR232, DR241, DR242 (STYLE S8 or later)
DAQSTATION: DX100, DX200
No. of subsystem stations: Max. 30 stations/ALE111
Communication protocol: TCP/IP
Table List of Applicable Devices
Data name Communication capacity
(per communication) Read Write
Alarm status DARWIN: 60 words
DAQSTATION: 30 words Y N
Measurement data DARWIN: 60 words
DAQSTATION: 30 words Y N
Calculation data DARWIN: 120 words
DAQSTATION: 60 words Y (*1) N
Y: Applicable
N: Not applicable
*1: This package supports only data import from DARWIN/DAQSTATION. Calculation start/stop has to be handled on the
DARWIN/DAQSTATION side.
PLC-5/SLC500 Communication
Connected device: PLC-S/SLC500 CPU module (CPU module equipped with communication ports)
Communication method: Ethernet connection via a hub. Or, with a 10BASE-T connection, a crossover cable can
also be used for a peer-to-peer connection without a hub. The communication via DH+ is
not accessible.
Applicable device: PLC-5/SLC500 CPU modules
PLC-5: PLC-5/20E, PLC-5/40E, PLC-5/80E
SLC500: SLC5/05
Transmission method: CSP protocol (Not complied with CIP protocol.)
No. of subsystem stations: Max. 30 stations/ALE111
(Sum of PLC-5 and SLC500, both devices can be resided together.)
Communication protocol: TCP/IP
Table List of Applicable Devices
Device type Device name
Communication capacity
(per communication) Read Write
PLC-5 SLC500
Bit file
Output image file 12 words (192 points) – Y (*1) N
Input image file 12 words (192 points) – Y (*1) N
Status file 8 words (128 points) 8 words (128 points) Y N
Bit file 600 words (600 points) 256 words (256 points) Y Y
Word file
Timer file 300 words (100 points) 300 words (100 points) Y Y
Counter file 600 words (200 points) 600 words (200 points) Y Y
Control file 600 words (200 points) 600 words (200 points) Y Y
Integer file 600 words (600 points) 256 words (256 points) Y Y
Floating point file 600 words (300 points) 512 words (256 points) Y Y
Y: Applicable
N: Not applicable
*1: Not readable by SLC500