取消

以太网以太网远传串口以太网交换机以太网以太网测试仪以太网交换机 232转以太网以太网防雷器以太网集线器以太网模块

商品
详情

Can转以太网模块can转以太网网关can转以太网设备

¥4000.00 5 - 49
¥3000.00 ≥50

参数

can以太网产品特性
否是否进口
上海产地

发货地上海长宁区 30天内发货供货总量100台

上海前望电子科技有限公司 2年: 进入店铺在线咨询

德国EMS Dr. Thomas CPC-PCIe 1-4通道pcie接口can卡 ¥3000.00

can卡CPC-USB/ARM7-GTI德国EMS Dr. Thomas公司 ¥2000.00

can fd板卡CPC-USB/FD德国EMS Dr. Thomas公司 ¥2000.00

CAN-IB100/PCIe德国ixxat品牌扩展CAN卡1到4通道can可选配 ¥3000.00

PCAN-USB FD德国peak中国公司IPEH-004022 can fd转usb接口面议

瑞典Kvaser USBcan Pro 4xHS货号01261-5 ¥8000.00

产品详情

Can以太网转can口支持网关CAN@net NT 100/200/420

CAN@net NT 100/200/420 Up to 4 x CAN (2 x CAN FD) CAN-Ethernet gateway, bridge and PC CAN-Ethernet 网关、网桥和 PC 接口

CAN@net NT 100/200/420

最多 4 个 CAN（2 个 CAN FD）

CAN-Ethernet 网关、网桥和 PC 接口

CAN@net NT 提供三种型号，作为带有一个*** CAN 通道和 D-Sub 9 连接器的 CAN@net NT 100，作为带有两个*** CAN 通道的 CAN@net NT 200 和作为带有四个 CAN 的 CAN@net NT 420 通道，其中两个通道可在 CAN 和 CAN FD 之间切换。所有设备均提供三种操作模式，可作为PC接口用作桥接器和网关。

The CAN@net NT is offered in three variants, as CAN@net NT 100 with one classic CAN channel and D-Sub 9 connector, as CAN@net NT 200 with two classic CAN channels and as CAN@net NT 420 with four CAN channels, of which two channels can be switched between CAN and CAN FD. All devices offer three operation modes and can be used as a PC interface as bridge and gateway.

Can以太网转can口支持网关CAN@net NT 100/200/420，CAN-Ethernet 网关、网桥和 PC 接口，can转以太网接口，can转以太网网关，can转以太网网桥

Can转以太网模块can转以太网网关can转以太网设备CAN@netNT100/200/420，CAN-Ethernet网关、网桥和PC接口，can转以太网接口，can转以太网网关，can转以太网网桥

技术参数：

多达四个独立的 CAN 通道（2 个 CAN FD 通道）

强大的过滤器、ID 转换、数据映射和多路复用功能

MQTT 支持轻松的云连接（发布者和订阅者）

使用事件触发的“动作规则”执行预定义的动作

使用 LUA 对任何类型的操作规则进行编程

Windows 配置工具，可通过 USB 或以太网轻松配置

设备访问的可配置安全级别（配置或固件上传）

专为工业环境中的高性能而设计

好处

CAN 和 CAN-FD 系统和设备的轻松耦合

使用以太网桥接远距离和轻松的远程系统访问

布线简单，节省成本

允许系统扩展和树形/星形拓扑

提高系统可靠性

通过电流隔离进行线路保护

FEATURES

Up to four independent CAN channels (2 CAN FD channels)

Powerful filter, ID translation, data mapping and multiplexing functionality

MQTT support for an easy cloud connection (publisher and subscriber)

Execution of pre-defined actions using event-triggered "Action Rules"

Programming of any kind of action rules using LUA

Windows configuration tool for easy configuration via USB or Ethernet

Configurable security levels for device access (configuration or firmware upload)

Designed for high performance in industrial environments

BENEFITS

1.01.0332.10000	CAN@net NT 100 - 1 CAN channel*
1.01.0332.20000	CAN@net NT 200 - 2 CAN channels*
1.01.0332.42000	CAN@net NT 420 - 4 CAN channels (2 switchable to CAN FD)*

* Please note: CAN@net NT 100, CAN@net NT 200 and CAN@net NT 420 can not be combined. For a CAN-Ethernet-CAN-Bridge please use either CAN@net NT 100, CAN@net NT 200 devices or CAN@net NT 420 devices.

Easy coupling of CAN and CAN-FD systems and devices

Bridging of large distances and easy remote system access using Ethernet

Cost savings due to simple wiring

Allows system expansion and tree/star topologies

Increased system reliability

Line protection by galvanic ***lation

TECHNICAL SPECIFICATIONS

Ethernet interface	10/100 MBit/s, twisted pair, RJ45 connector
CAN channels	CAN@net NT 100: 1 x CAN CAN@net NT 200: 2 x CAN CAN@net NT 420: 4 x CAN (two of them with CAN FD)
CAN connection	CAN@net NT 100: D-Sub 9 CAN@net NT 200: Screw connector CAN@net NT 420: Screw connector
Max. number of bus nodes	120
CAN bus termination resistor	None
CAN bitrates	5 to 1000 kBit/s
CAN FD bitrates	Arbitration rate up to 1000 kBit/s, data rate up to 8000 kbit/s. The data rates are verified by tests. User-defined bit rates are possible. Attention: The maximum data rate can be exceeded depending on the concrete operating conditions (cable length, settings made, remote stations,...), but it can also not be reached.
Power supply	9 V to 36 V DC
Current consumption	typically 110 mA (at 24 V input voltage) or 230 mA (at 12 V input voltage)
Temperature range	Operating temperature -40 °C to +85 °C, Storage temperature -40 °C to +85 °C
Galvanic ***lation	1 kV for 1 sec.
Certification	CE, FCC, UL
Housing	Polyamide housing for top hat rail mounting
Protection class	IP20
Size	approx. 114.5 x 99 x 22.5 mm
Weight	approx. 150 g