- 商品
- 详情
- 否是否进口
- 3057 M型号
- 安润龙品牌
ANDEROL ®3057M
SYNTHETIC COMPRESSOR OIL, ISO 46/68
For more information please refer tothe relevant
Material Safety Data Sheet accompanyingeach
product.
®ANDEROL is a reg. trademark of ANDEROL COMPANY.
This information is furnished without warranty, representation,inducement,
or license of any kind, except that it is accurate to the bestof OUR
knowledge or obtained from sources believed by ANDEROL to be
accurate. ANDEROL does not assume any legal responsibility foruse of
reliance upon it. Only chemists or chemically qualified labtechnicians
should carry out tests. Before using any chemical, read itslabel and
Material Safety Data Sheet.
GENERAL INFORMATION
ANDEROL 3057M is a PAO-basedcompressor lubricant that was designed to provide long-term lubrication of both
rotary-vane and oil-flooded screwcompressors.
TYPICAL PROPERTIES:
PROPERTY TEST METHOD TYPICAL
RESULTS
ISO Viscosity Grade
Viscosity @ 40°C, cSt
Viscosity @ 100°C, cSt
Viscosity @ -25°C, cSt
Viscosity Index
Density @ 15°C, kg/l
Pour Point, °C
Flash Point, COC, °C
Total Acid Number, mg KOH/g
Humidity, %
Evaporation, 22 hrs @ 210 °F, %
Demulsibility @ 54 °C, mloil/water/emulsion (min)
Copper Strip Corrosion 8 hrs @ 100°C
Four-Ball Wear, 1200 rpm, 75 °C, 40kg, 1 hr, mm
Foaming Tendency, Sequence I, II,III
Specific Gravity @15.6°C
ASTM D-2422
ASTM - 445
ASTM - 445
ASTM D-445
ASTM D-2270
DIN 51.757
ASTM D-97
ASTM D-92
ASTM D-664
ASTM D-1744
ASTM D-972
ASTM D-1401
ASTM D-130
ASTM D-4172
ASTM D-892
ASTM D -1298
46/68
55.3
8.13
3672
116
0.864
-66
260
0.05
0.02
<1
40/38/2 (15)
1a
0.6
Nil
0.8 5
ANDEROL3057M
APPLICATIONS
· Recommended for use in compressorssuch as:
· Oil flooded rotary screw compressors
· Oil flooded rotary vane compressors
· Reciprocating compressors
Nominal operating range for Anderol3057M is -40°F to 400°F (-40°C to 205°C).
APPROVALS
Tested and approved by Knorr-BremseAG (Knorr Brake Corporation). Should you have any questions regarding thesuitability of
ANDEROL 3057M compressor lubricantfor a specific manufacturer&＃39;s model compressor, please check with your ANDEROL
lubricant supplier or contactAnderol Company.
ADVANTAGES
· Fewer oil changes for reducedmaintenance
· Compatible with compressor seals,gaskets, hoses, and air system components
· Resistance to oxidation with reducedcompressor varnish and deposits
· Greatly reduces fire and explosionhazard
· Longer service life and greaterprotection of compressor components
· Lower oil consumption
COMPATIBILITY
ANDEROL synthetic hydrocarbon basedlubricants are similar to mineral oils in their compatibility with paints,seals, gaskets and
hoses. No special precautionsrelated to compatibility are required when
在线问
- 否
- 3057 M
- 安润龙
- 0.864
- 260
- 55.3
- 46/68
- -66
