KLINGERSealex joint sealant can be used wherever reliable gasketing is required.
Sealex接缝密封可用于需要可靠密封的地方。
Fume ducts 烟气管道
Concrete lids 混凝土盖子
Glass joints 玻璃接头
Heat exchangers 换热器
Fiberglass reinforced plastic vessels 玻璃纤维增?6?7?6?7强塑料容器
Pump or compressor housing flanges 泵或压缩机壳体法兰
Steam vessel flanges 蒸汽容器法兰
Ceramic joints 陶瓷接头
Water systems 水系统
Valves and piping 阀门和管道
KLINGERSealex® joint sealant, specially processed, *** pure PTFE on a roll, provides soft, highly compressible gasketing for longer life and trouble-free sealing. Its form-in-place versatility also cuts maintenance and storage costs. The high compressibility of Sealex® enables it to effectively fill flange imperfections for a tight, leak-free seal. Under pressure, it provides a very wide, thin ribbon-like joint sealant. Unlike conventional PTFE which is prone to cold flow, Sealex® has good creep resistance and bolt torque retention properties
KLINGERSealex®接缝密封胶,经过特殊加工,100%纯PTFE在辊上,提供柔软,高度可压缩的衬垫,延长使用寿命,无故障密封。其现场多功能性还可降低维护和存储成本。 Sealex®的高压缩性使其能够有效填充法兰缺陷,实现紧密,无泄漏的密封。在压力下,它提供了一种非常宽的薄带状接缝密封剂。与传统的易于冷流动的PTFE不同,Sealex®具有良好的抗蠕变性和螺栓扭矩保持性能
KLINGERSealex joint sealant does not support bacterial growth or cause product contamination and is FDA compliant. It has virtually no shelf-life concerns since PTFE is unaffected by normal environmental conditions.
Sealex接缝密封胶不支持细菌生长或导致产品污染,符合FDA标准。它几乎没有保质期问题,因为PTFE不受正常环境条件的影响。
Sealex has excellent resistance properties to chemical attack. It is ideal for most chemical services at temperatures to 500°F (260°C) and pressure to 2,000 psi (138 bar). It is also suitable for cryogenic use to -321°F (-196°C).
Sealex具有***抗化学侵蚀性。它适用于大多数化学品服务,温度为500°F(260°C),压力为2,000 psi(138 bar)。它也适用于-321°F(-196°C)的低温使用。