供应北京、天津紫外光老化试验箱哪家？

¥100.00 ≥1台起批

参数

是加工定制
鸿达天矩品牌
HT/Z-UV型号

发货地北京朝阳区 10天内发货供货总量10台

北京鸿达天矩试验设备有限公司: 进入店铺在线咨询

自产自销紫外线老化试验箱 TH-UV3金属产品测试 ¥2.50

照明工业电子元器件耐老化检测皓天紫外老化试验箱 ¥5578.00

供应苏州紫外老化试验箱/苏州UV紫外线加速老化试验箱 ¥4.15

紫外灯耐气候试验箱紫外老化箱紫外老化试验箱面议

uv紫外光老化试验箱 ¥5.30

东莞紫外线耐候老化试验箱工厂面议

产品详情

紫外老化试验箱控制系统：

1.采用黑色铝板连接温度传感器，采用黑板温度仪表控制加热，温度更稳定。

2.辐射计探头采用固定式，无须每次装卸。

3.辐射量采用高精度显示和测量的专用紫外线辐照计。

4.辐射度不大于0.68W/m2。

5.附件:不锈钢样品架：48个。

6.控温控湿方式:平衡式调温调湿(BTHC)。

7.控制仪：西门子触摸屏程控仪。

8.辐照度控制：UV-B紫外辐射计,（选配UV-A紫外辐射计），可设定、测量紫外辐射强度并通过累时计算辐射功积算值。

9.暴露方式：湿气冷凝暴露，光照辐射暴露。

10.温度控制器：采用智能数显温度控制仪，精度高，控制平稳。

11.时间控制器：采用可编程控制仪，光照、冷凝时间可自动转换。控制的时间可在一千小时内任意设置。

12.供水方式：自动供水补水功能。

13.通信:可双向联机（RS585通信接口），界面友好（选配）。

14.安全保护:电源用漏电断路器,控制回路过载短路报警,超温报警,缺水保护。

Ultraviolet aging test box control system:

1. Connected by black aluminum plate temperature sensor, using the blackboard instrument temperature control heating, the temperature is more stable.

2. The radiometer sensor fixed without loading and unloading at a time.

3. The radiation according to the measurement and special uv irradiation meter with high precision.

4. The radiation is not more than 0.68 W/m2.

5. Accessories: stainless steel rack: 48.

6. Control temperature wet way: balanced temperature humidity (BTHC).

7. Control instrument: Siemens touch screen program.

8. The irradiance control: UV - B ultraviolet radiometer, uv-a ultraviolet radiometer (selected), it can be set and measure the intensity of ultraviolet radiation and by integrating value calculated radiation work when you are tired.

9. Exposure method: exposure to moisture condensation, light radiation exposure.

10. The temperature controller: using intelligent digital display temperature control instrument

紫外老化试验箱 产品用途:

紫外老化试验箱采用能模拟阳光中UV段光谱的荧光紫外灯，并结合控温、供湿等装置来模拟对材料造成变色、亮度、强度下降；开裂、剥落、粉化、氧化等损害的阳光（UV段）高温、高湿、凝露、黑暗周期等因素，同时通过紫外光与湿气之间的协同作用使得材料单一耐光能力或单一耐湿能力减弱或失效，从而广泛用于对材料耐气候性能的评价，设备具有提供的阳光UV模拟，使用维护成本低廉，易于使用，设备采用程控器自动运行试验周期，自动化程度高，灯光稳定性好，试验结果重现***等特点。

Ultraviolet aging test box product use:

Ultraviolet aging test box adopts can best simulated sunlight UV spectra of the fluorescent UV lamp, and combined with temperature control, such as for wet device to simulate the material cause the loss of color, brightness and strength; Cracking, peeling,
pulverization, such as oxidation damage of sunlight (UV) factors such as high temperature, high humidity and condensation, dark cycle, at the same time through ultraviolet synergy between moisture and make material single light or single wet resistance
ability weakened or failure, which is widely used in the material resistance to climate, to evaluate the performance of equipment has to provide the best sunlight UV simulation, using the maintenance cost is low, easy to use, the device USES the program
controller automatically run test cycles, high degree of automation, lighting good stability, high recurrence rate ? test results

为您推荐更多 >